Allright! here’s the guide for rooting XWJVH. I’ve not made any new video for this guide as the rooting process is similar to previous ROM (XWJVB).
[info]This guide is applicable only for Samsung’s Galaxy S international version (i9000). If yours is Vibrant/Captivate/Fascinate/Epic 4G or any other Galaxy S variant, then this ROM — and Guide — is not for you, and that’s for definite.[/info]
[warning]The methods and procedures discussed here are considered risky and you should not attempt if you don’t know completely what it is. If any damage occurs to you or your device, we won’t be held liable. You only will be responsible — you’ve been warned. Okay![/warning]
CF-Root Installation Video:
So here’s what you need to do to root your XWJVH Android 2.3.3 Firmware for Galaxy S:
- Download CF-Root kernel. File name – CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.zip. Download Link [Link updated]
- Unzip the above file. You will get the .tar file – “CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.tar”. We will be flashing this .tar file using ODIN to gain root access and install the CWM alongside.
- Download Odin. File name – Odin3 v1.7. Download Link. Extract the zip file to get Odin3 1.7.exe. Run Odin by double clicking on it.
- Switch Off your phone. Wait for vibration to confirm complete switch off.
- Boot your phone in Download Mode — Press and hold “VolumeDOWN + HOME key + POWER button” together.
- Connect your phone to PC now. You’ll notice “Added! !” message in the message box.
- On Odin, click the “PDA” box and select the .tar file you got in step 2 — CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.tar
- Do NOT select any “.pit” file in the “PIT” box, and make sure “Repartition” button is NOT checked.
- Leave the “Auto Reboot” and “F. Reset Time” buttons checked.
- Double check Step 7, 8 & 9.
- Click the Start button on Odin to begin installing the CF Root kernel.
- After the CF Root is installed, phone will restart.
- Your phone is rooted now. Note that surperuser app is there.
ClockworkMod [CWM] Recovery:
To boot into ClockworkMod Recovery — power Off your phone completely and then, press and hold (till Galaxy S logo appears): VolumeUP+HOME+POWER. You’ll enter the CWM recovery. You can use this to:
- Backup your ROMs
- Restore backed up ROMs
- Delete Backups
- Flash update.zip files
- Flash custom themes
- Flash kernels (zImage, zImage in TAR, zImage in ZIP, zImage in TAR in ZIP)
CF-Root kernel was created by XDA dev Chainfire, you can visit his original post here. And if you feel like supporting him, use donate button below:
[button link=”http://forum.xda-developers.com/donatetome.php?u=631273″ icon=”” style=””]Donate Chainfire[/button]
So that was it. You can use the comment box below to share your happiness and problems 😉
355 responses to “How To Root XWJVH Android 2.3.3 ROM for Galaxy S i9000”
Thankkk youuuuu
Thank you. You sir, are a diamond.
this kernel makes the phone restart every time you try to turn on wi-fi is there a possible way to go back without “root” because i prefer to wait for a stable kernel or something
Also, that link takes you to XEE_JB 3.1, not NEE_JVH3.2
I’m getting the reboot loop now I flashed that link kernel. 🙁
Oh no! I’m so sorry for the mistake.. wait I’m fixing it. Don’t do anything else to your phone till then. Sorry Again!
Oh no! I’m so sorry for the mistake.. wait I’m fixing it. Don’t do anything else to your phone till then. Sorry Again!
yeah thats whats happening to me, what do we have to do now??
@87abdc01169fe84bf7589ffd2690ecd7:disqus @6004df265d03d67c2e85cde29eeacba6:disqus Okay flash this kernel (NEE_JVH-v3.2) download from here — http://hotfile.com/dl/117803531/4f7bf14/CF-Root-XW_NEE_JVH-v3.2-CWM3RFS_2.zip.html
so we repeat the process of installing the kernel as normal??
Yes.
If that doesn’t work then flash the whole ROM (JVH) again, and then flash this Cf-Root kernel. I’m sorry for the trouble 🙁
nooo need to be sorryyy!!!!! man thanks for being so helpful
Thanks alot
Its working, thank you very much. this might seem a noob question but why doesnt the start up music play everytime you install Cf-root kernel??
Thank you, worked perfectly.
No trouble, just glad you guys are doing what you are for us all.
Thank you
@87abdc01169fe84bf7589ffd2690ecd7:disqus @6004df265d03d67c2e85cde29eeacba6:disqus Okay flash this kernel (NEE_JVH-v3.2) download from here — http://hotfile.com/dl/117803531/4f7bf14/CF-Root-XW_NEE_JVH-v3.2-CWM3RFS_2.zip.html
so we repeat the process of installing the kernel as normal??
Yes.
If that doesn’t work then flash the whole ROM (JVH) again, and then flash this Cf-Root kernel. I’m sorry for the trouble 🙁
nooo need to be sorryyy!!!!! man thanks for being so helpful
Thanks alot
Its working, thank you very much. this might seem a noob question but why doesnt the start up music play everytime you install Cf-root kernel??
Thank you, worked perfectly.
No trouble, just glad you guys are doing what you are for us all.
Thank you
Thank goodness it worked for both of you 🙂
and @6004df265d03d67c2e85cde29eeacba6:disqus there’s no sound because it’s not included in the kernel. Can’t help.
Ok it doesnt matter its something silly thanks again hurrayyyy 🙂
Thank goodness it worked for both of you 🙂
and @6004df265d03d67c2e85cde29eeacba6:disqus there’s no sound because it’s not included in the kernel. Can’t help.
Ok it doesnt matter its something silly thanks again hurrayyyy 🙂
Thankkk youuuuu
Thankkk youuuuu
Thank you. You sir, are a diamond.
Thank you. You sir, are a diamond.
this kernel makes the phone restart every time you try to turn on wi-fi is there a possible way to go back without “root” because i prefer to wait for a stable kernel or something
this kernel makes the phone restart every time you try to turn on wi-fi is there a possible way to go back without “root” because i prefer to wait for a stable kernel or something
Sorry but I’m very new to this.
Can you tell me how I can install Voodoo lagfix on my SGS 2.3.3 XWJVH which I just rooted thanks to your guide? It’s all very confusing and I would love a step-by-step guide!
You don’t need a VooDoo lagfix for real. But I’ll try getting you something
so that you can install it if you want. JVH is already very good.
You don’t need a VooDoo lagfix for real. But I’ll try getting you something
so that you can install it if you want. JVH is already very good.
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CIi6qcq_36kCFcK17AodRzRKGA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGxgESEyS7HtA0-qRKiyUS2NBn705TOT8xxnaJLnbOLhpJX-dMmDPIKDD-h82i3xzEZgJwbojDRl0nGtU7lddX442VmecI_dApvW6-SY5UyRlc7kOUw%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CIi6qcq_36kCFcK17AodRzRKGA&path=%2Fwelcome%3Fgpinv%3DAGXbFGxgESEyS7HtA0-qRKiyUS2NBn705TOT8xxnaJLnbOLhpJX-dMmDPIKDD-h82i3xzEZgJwbojDRl0nGtU7lddX442VmecI_dApvW6-SY5UyRlc7kOUw%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CIi6qcq_36kCFcK17AodRzRKGA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGxgESEyS7HtA0-qRKiyUS2NBn705TOT8xxnaJLnbOLhpJX-dMmDPIKDD-h82i3xzEZgJwbojDRl0nGtU7lddX442VmecI_dApvW6-SY5UyRlc7kOUw%26est%3DADH5u8WvkK7Gjjj3ayov9FgRTn_agSIZeswL9MxO9_169d0tgHwgFM1cUBUse-SOtGujS4YVFQC_txvnlVImNJoUWDTroLXiwE4LZ9VKbWICh5VOHXHWPtNor8-pWDzx3fx6mnE-Er-MEh97Tz7sI7l5nUNYKAutIQ%26hl%3Den
Also, that link takes you to XEE_JB 3.1, not NEE_JVH3.2
Also, that link takes you to XEE_JB 3.1, not NEE_JVH3.2
I’m getting the reboot loop now I flashed that link kernel. 🙁
Oh no! I’m so sorry for the mistake.. wait I’m fixing it. Don’t do anything else to your phone till then. Sorry Again!
yeah thats whats happening to me, what do we have to do now??
I’m getting the reboot loop now I flashed that link kernel. 🙁
Oh no! I’m so sorry for the mistake.. wait I’m fixing it. Don’t do anything else to your phone till then. Sorry Again!
yeah thats whats happening to me, what do we have to do now??
@87abdc01169fe84bf7589ffd2690ecd7:disqus @6004df265d03d67c2e85cde29eeacba6:disqus Okay flash this kernel (NEE_JVH-v3.2) download from here — http://hotfile.com/dl/117803531/4f7bf14/CF-Root-XW_NEE_JVH-v3.2-CWM3RFS_2.zip.html
so we repeat the process of installing the kernel as normal??
Yes.
If that doesn’t work then flash the whole ROM (JVH) again, and then flash this Cf-Root kernel. I’m sorry for the trouble 🙁
nooo need to be sorryyy!!!!! man thanks for being so helpful
Thanks alot
Its working, thank you very much. this might seem a noob question but why doesnt the start up music play everytime you install Cf-root kernel??
No trouble, just glad you guys are doing what you are for us all.
Thank you
Thank you, worked perfectly.
@87abdc01169fe84bf7589ffd2690ecd7:disqus @6004df265d03d67c2e85cde29eeacba6:disqus Okay flash this kernel (NEE_JVH-v3.2) download from here — http://hotfile.com/dl/117803531/4f7bf14/CF-Root-XW_NEE_JVH-v3.2-CWM3RFS_2.zip.html
so we repeat the process of installing the kernel as normal??
Yes.
If that doesn’t work then flash the whole ROM (JVH) again, and then flash this Cf-Root kernel. I’m sorry for the trouble 🙁
nooo need to be sorryyy!!!!! man thanks for being so helpful
Thanks alot
Its working, thank you very much. this might seem a noob question but why doesnt the start up music play everytime you install Cf-root kernel??
No trouble, just glad you guys are doing what you are for us all.
Thank you
Thank you, worked perfectly.
Thank goodness it worked for both of you 🙂
and @6004df265d03d67c2e85cde29eeacba6:disqus there’s no sound because it’s not included in the kernel. Can’t help.
Ok it doesnt matter its something silly thanks again hurrayyyy 🙂
Thank goodness it worked for both of you 🙂
and @6004df265d03d67c2e85cde29eeacba6:disqus there’s no sound because it’s not included in the kernel. Can’t help.
Ok it doesnt matter its something silly thanks again hurrayyyy 🙂
Sorry but I’m very new to this.
Can you tell me how I can install Voodoo lagfix on my SGS 2.3.3 XWJVH which I just rooted thanks to your guide? It’s all very confusing and I would love a step-by-step guide!
You don’t need a VooDoo lagfix for real. But I’ll try getting you something
so that you can install it if you want. JVH is already very good.
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CIi6qcq_36kCFcK17AodRzRKGA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGxgESEyS7HtA0-qRKiyUS2NBn705TOT8xxnaJLnbOLhpJX-dMmDPIKDD-h82i3xzEZgJwbojDRl0nGtU7lddX442VmecI_dApvW6-SY5UyRlc7kOUw%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CIi6qcq_36kCFcK17AodRzRKGA&path=%2Fwelcome%3Fgpinv%3DAGXbFGxgESEyS7HtA0-qRKiyUS2NBn705TOT8xxnaJLnbOLhpJX-dMmDPIKDD-h82i3xzEZgJwbojDRl0nGtU7lddX442VmecI_dApvW6-SY5UyRlc7kOUw%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CIi6qcq_36kCFcK17AodRzRKGA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGxgESEyS7HtA0-qRKiyUS2NBn705TOT8xxnaJLnbOLhpJX-dMmDPIKDD-h82i3xzEZgJwbojDRl0nGtU7lddX442VmecI_dApvW6-SY5UyRlc7kOUw%26est%3DADH5u8WvkK7Gjjj3ayov9FgRTn_agSIZeswL9MxO9_169d0tgHwgFM1cUBUse-SOtGujS4YVFQC_txvnlVImNJoUWDTroLXiwE4LZ9VKbWICh5VOHXHWPtNor8-pWDzx3fx6mnE-Er-MEh97Tz7sI7l5nUNYKAutIQ%26hl%3Den
Sorry but I’m very new to this.
Can you tell me how I can install Voodoo lagfix on my SGS 2.3.3 XWJVH which I just rooted thanks to your guide? It’s all very confusing and I would love a step-by-step guide!
You don’t need a VooDoo lagfix for real. But I’ll try getting you something
so that you can install it if you want. JVH is already very good.
its not working for me…phone is getting restarted again n again..plz tell me how to revert back …??
Is it ok to use Odin3 1.3, since I have Windows x64?
It should be okay, I guess.
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CPCCvsq_36kCFcK17AodRzRKGA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGx5mcw8OEi83KB0-aanA91gS-gChIaqm118shoAR6vBcYd9xhodfZgVmsh5leXQcosWjVESgFZ42aPhW7eOq9MqDBPsozqagDDpMjQ3jMGgLPul854%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CPCCvsq_36kCFcK17AodRzRKGA&path=%2Fwelcome%3Fgpinv%3DAGXbFGx5mcw8OEi83KB0-aanA91gS-gChIaqm118shoAR6vBcYd9xhodfZgVmsh5leXQcosWjVESgFZ42aPhW7eOq9MqDBPsozqagDDpMjQ3jMGgLPul854%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CPCCvsq_36kCFcK17AodRzRKGA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGx5mcw8OEi83KB0-aanA91gS-gChIaqm118shoAR6vBcYd9xhodfZgVmsh5leXQcosWjVESgFZ42aPhW7eOq9MqDBPsozqagDDpMjQ3jMGgLPul854%26est%3DADH5u8Wb2SQhs9QF9CvIPd7bjH_iLMJirgvrZ4sFYfnek1s-3rydP10NnK7A1P0hRgP03Xs0Fma_Y5Z_WY7BOvSJf_af0_E_rLgp3pAzA2gVBInhAylFFFrL5c2aa6sfPXLF9WCI8G9_pS8TrI9tdWQkd0FZwG6ddA%26hl%3Den
its not working for me…phone is getting restarted again n again..plz tell me how to revert back …??
its not working for me…phone is getting restarted again n again..plz tell me how to revert back …??
Is it ok to use Odin3 1.3, since I have Windows x64?
It should be okay, I guess.
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CPCCvsq_36kCFcK17AodRzRKGA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGx5mcw8OEi83KB0-aanA91gS-gChIaqm118shoAR6vBcYd9xhodfZgVmsh5leXQcosWjVESgFZ42aPhW7eOq9MqDBPsozqagDDpMjQ3jMGgLPul854%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CPCCvsq_36kCFcK17AodRzRKGA&path=%2Fwelcome%3Fgpinv%3DAGXbFGx5mcw8OEi83KB0-aanA91gS-gChIaqm118shoAR6vBcYd9xhodfZgVmsh5leXQcosWjVESgFZ42aPhW7eOq9MqDBPsozqagDDpMjQ3jMGgLPul854%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CPCCvsq_36kCFcK17AodRzRKGA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGx5mcw8OEi83KB0-aanA91gS-gChIaqm118shoAR6vBcYd9xhodfZgVmsh5leXQcosWjVESgFZ42aPhW7eOq9MqDBPsozqagDDpMjQ3jMGgLPul854%26est%3DADH5u8Wb2SQhs9QF9CvIPd7bjH_iLMJirgvrZ4sFYfnek1s-3rydP10NnK7A1P0hRgP03Xs0Fma_Y5Z_WY7BOvSJf_af0_E_rLgp3pAzA2gVBInhAylFFFrL5c2aa6sfPXLF9WCI8G9_pS8TrI9tdWQkd0FZwG6ddA%26hl%3Den
Is it ok to use Odin3 1.3, since I have Windows x64?
It should be okay, I guess.
worked very well for me thanks alot! 😀
Thank you, man!
worked very well for me thanks alot! 😀
Thank you, man!
worked very well for me thanks alot! 😀
Thank you, man!
Is there a lagfix for this one?
Is there a lagfix for this one?
Is there a lagfix for this one?
i keep gettin zimage file
Read the instructions carefully. You only have to extract the “.zip” file from the link given above.
Do NOT extract the “.tar” file. Okay!
Read the instructions carefully. You only have to extract the “.zip” file from the link given above.
Do NOT extract the “.tar” file. Okay!
i keep gettin zimage file
Read the instructions carefully. You only have to extract the “.zip” file from the link given above.
Do NOT extract the “.tar” file. Okay!
i keep gettin zimage file
Read the instructions carefully. You only have to extract the “.zip” file from the link given above.
Do NOT extract the “.tar” file. Okay!
When i download CF-Root kernel i get file ”zImage” and not “CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.tar”. What’s with that?
Read the instructions carefully. You only have to extract the “.zip” file from the link given above.
Do NOT extract the “.tar” file. Okay!
Read the instructions carefully. You only have to extract the “.zip” file from the link given above.
Do NOT extract the “.tar” file. Okay!
When i download CF-Root kernel i get file ”zImage” and not “CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.tar”. What’s with that?
Read the instructions carefully. You only have to extract the “.zip” file from the link given above.
Do NOT extract the “.tar” file. Okay!
When i download CF-Root kernel i get file ”zImage” and not “CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.tar”. What’s with that?
Read the instructions carefully. You only have to extract the “.zip” file from the link given above.
Do NOT extract the “.tar” file. Okay!
I rooted this one on my phone but discovered to my disapointment that i can’t reed my texts anymore, it’s just a loocker and an cirkular arrow in the field where the text should be…. and i tried go around the problem by checking in the phones instalations but nothing is helping me… do you know how i can solve this problem?
I rooted this one on my phone but discovered to my disapointment that i can’t reed my texts anymore, it’s just a loocker and an cirkular arrow in the field where the text should be…. and i tried go around the problem by checking in the phones instalations but nothing is helping me… do you know how i can solve this problem?
I rooted this one on my phone but discovered to my disapointment that i can’t reed my texts anymore, it’s just a loocker and an cirkular arrow in the field where the text should be…. and i tried go around the problem by checking in the phones instalations but nothing is helping me… do you know how i can solve this problem?
thank you
thank you
thank you
I just followed the guide, and Odin worked without any problems.
But unfortunately the phone wont startup, it blinking between blackscreen and the startup text 🙁
But I can enter the recovery menu.
What could I have been doing wrong?
And can anyone help me ?
If you can enter recovery menu, then try to factory reset your phone.
Remember it will wipe your data
If you can enter recovery menu, then try to factory reset your phone.
Remember it will wipe your data
I just tried it…
But its doing the same ?
What to do…
Try flashing the ROM again, and then flash CF root again
Try flashing the ROM again, and then flash CF root again
How do I install the orginal ROM again ?
Normally I use Samsung Kies, but I guess this wont work this time 🙁
Well install the original ROM using this guide [link below]
https://nerdschalk.com/how-to-install-xwjvh-on-your-galaxy-s-i9000/
Well install the original ROM using this guide [link below]
https://nerdschalk.com/how-to-install-xwjvh-on-your-galaxy-s-i9000/
Follow the instructions carefully. okay!
Follow the instructions carefully. okay!
I just went throgh the guide again, and everything did as before, and the phone ends up with a battery on the display, because its charging via the usb.After I disconnect it keeps changeing between black and text 🙁
This is what Odin says…
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
zImage
Removed!!
Completed..
All threads completed. (succeed 1 / failed 0)
Thanks.
Now Im running again.
Dont know if I dare try to root again.
Under settings my code is:
XWJVH
Does that do anything special ?
You most probably wont face any trouble If you follow the rooting guide now.
And yes it has to be “XWJVH” cuz this rooting guide is for XWJVH firmwares
only
You most probably wont face any trouble If you follow the rooting guide now.
And yes it has to be “XWJVH” cuz this rooting guide is for XWJVH firmwares
only
Evrything is back to normal, and this time the rooting went well , thanks.
@2de2d0c57c8e36b0b6ab26c65d316e05:disqus You mean you followed instructions on this page — https://nerdschalk.com/how-to-install-xwjvh-on-your-galaxy-s-i9000/
@2de2d0c57c8e36b0b6ab26c65d316e05:disqus You mean you followed instructions on this page — https://nerdschalk.com/how-to-install-xwjvh-on-your-galaxy-s-i9000/
I just followed the guide, and Odin worked without any problems.
But unfortunately the phone wont startup, it blinking between blackscreen and the startup text 🙁
But I can enter the recovery menu.
What could I have been doing wrong?
And can anyone help me ?
If you can enter recovery menu, then try to factory reset your phone.
Remember it will wipe your data
I just tried it…
But its doing the same ?
What to do…
Try flashing the ROM again, and then flash CF root again
How do I install the orginal ROM again ?
Normally I use Samsung Kies, but I guess this wont work this time 🙁
Well install the original ROM using this guide [link below]
https://nerdschalk.com/how-to-install-xwjvh-on-your-galaxy-s-i9000/
Thanks.
Now Im running again.
Dont know if I dare try to root again.
Under settings my code is:
XWJVH
Does that do anything special ?
You most probably wont face any trouble If you follow the rooting guide now.
And yes it has to be “XWJVH” cuz this rooting guide is for XWJVH firmwares
only
Evrything is back to normal, and this time the rooting went well , thanks.
Follow the instructions carefully. okay!
I just went throgh the guide again, and everything did as before, and the phone ends up with a battery on the display, because its charging via the usb.After I disconnect it keeps changeing between black and text 🙁
This is what Odin says…
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
zImage
Removed!!
Completed..
All threads completed. (succeed 1 / failed 0)
I just followed the guide, and Odin worked without any problems.
But unfortunately the phone wont startup, it blinking between blackscreen and the startup text 🙁
But I can enter the recovery menu.
What could I have been doing wrong?
And can anyone help me ?
If you can enter recovery menu, then try to factory reset your phone.
Remember it will wipe your data
I just tried it…
But its doing the same ?
What to do…
Try flashing the ROM again, and then flash CF root again
How do I install the orginal ROM again ?
Normally I use Samsung Kies, but I guess this wont work this time 🙁
Well install the original ROM using this guide [link below]
https://nerdschalk.com/how-to-install-xwjvh-on-your-galaxy-s-i9000/
Thanks.
Now Im running again.
Dont know if I dare try to root again.
Under settings my code is:
XWJVH
Does that do anything special ?
You most probably wont face any trouble If you follow the rooting guide now.
And yes it has to be “XWJVH” cuz this rooting guide is for XWJVH firmwares
only
Evrything is back to normal, and this time the rooting went well , thanks.
Follow the instructions carefully. okay!
I just went throgh the guide again, and everything did as before, and the phone ends up with a battery on the display, because its charging via the usb.After I disconnect it keeps changeing between black and text 🙁
This is what Odin says…
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
zImage
Removed!!
Completed..
All threads completed. (succeed 1 / failed 0)
@2de2d0c57c8e36b0b6ab26c65d316e05:disqus You mean you followed instructions on this page — https://nerdschalk.com/how-to-install-xwjvh-on-your-galaxy-s-i9000/
@2de2d0c57c8e36b0b6ab26c65d316e05:disqus You mean you followed instructions on this page — https://nerdschalk.com/how-to-install-xwjvh-on-your-galaxy-s-i9000/
My galaxy s is all jh1, and stuck in 2.1 – update 1, if I do the flash, will it become 2.3? Thanks.
Yes, flash the ROM, XXJVO to install Android 2.3.3 on your Galaxy S i9000
phone. Search for it on this website to find installation instructions and
download links.
Yes, flash the ROM, XXJVO to install Android 2.3.3 on your Galaxy S i9000
phone. Search for it on this website to find installation instructions and
download links.
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2Fwelcome%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26est%3DADH5u8VDSb-dUhnPH4Vb-EJyV84Tx98wQiJFPTMEXFw54yGdC7o9vlDrYeh1SbjNV056gIpqqZGwyZVMXl2eFjRr1nWdxzIgviYm-_WBLy3tq8fySENuWB1OUSicNp2CKfLt7tgRXJcFwo97ZeLuQdmTOgn5j3X0Qg%26hl%3Den
My galaxy s is all jh1, and stuck in 2.1 – update 1, if I do the flash, will it become 2.3? Thanks.
Yes, flash the ROM, XXJVO to install Android 2.3.3 on your Galaxy S i9000
phone. Search for it on this website to find installation instructions and
download links.
Yes, flash the ROM, XXJVO to install Android 2.3.3 on your Galaxy S i9000
phone. Search for it on this website to find installation instructions and
download links.
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2Fwelcome%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26est%3DADH5u8VDSb-dUhnPH4Vb-EJyV84Tx98wQiJFPTMEXFw54yGdC7o9vlDrYeh1SbjNV056gIpqqZGwyZVMXl2eFjRr1nWdxzIgviYm-_WBLy3tq8fySENuWB1OUSicNp2CKfLt7tgRXJcFwo97ZeLuQdmTOgn5j3X0Qg%26hl%3Den
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2Fwelcome%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26est%3DADH5u8VDSb-dUhnPH4Vb-EJyV84Tx98wQiJFPTMEXFw54yGdC7o9vlDrYeh1SbjNV056gIpqqZGwyZVMXl2eFjRr1nWdxzIgviYm-_WBLy3tq8fySENuWB1OUSicNp2CKfLt7tgRXJcFwo97ZeLuQdmTOgn5j3X0Qg%26hl%3Den
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2Fwelcome%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CPjrpcu_36kCFeJY7Aodx39XGA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGyeTHCoLYcC8lssV-eiuObVkEAp6DYDrHud0Vo1LfWq1H3ykJUu3jF5RbM_1_wPZs7Pce8mtV0OvOuR_AtoLwi99WRwsfXGNiEDgBQsV5YdtvDPzmU%26est%3DADH5u8VDSb-dUhnPH4Vb-EJyV84Tx98wQiJFPTMEXFw54yGdC7o9vlDrYeh1SbjNV056gIpqqZGwyZVMXl2eFjRr1nWdxzIgviYm-_WBLy3tq8fySENuWB1OUSicNp2CKfLt7tgRXJcFwo97ZeLuQdmTOgn5j3X0Qg%26hl%3Den
My galaxy s is all jh1, and stuck in 2.1 – update 1, if I do the flash, will it become 2.3? Thanks.
Yes, flash the ROM, XXJVO to install Android 2.3.3 on your Galaxy S i9000
phone. Search for it on this website to find installation instructions and
download links.
hi, i’m Terrence. I follow your rooting instruction as at https://nerdschalk.com/how-to-root-xwjvh-android-2-3-3-rom-for-galaxy-s-i9000/….after step 12 “After the CF Root is installed, phone will restart.”..however, my galaxy s is keep repeating with the screen of flashing S (the screen which we normally see when switch on phone)…
what can I do as I was stuck in this screen and not able to get into main page.
hi, i’m Terrence. I follow your rooting instruction as at https://nerdschalk.com/how-to-root-xwjvh-android-2-3-3-rom-for-galaxy-s-i9000/….after step 12 “After the CF Root is installed, phone will restart.”..however, my galaxy s is keep repeating with the screen of flashing S (the screen which we normally see when switch on phone)…
what can I do as I was stuck in this screen and not able to get into main page.
Make sure you’re trying the root on the XWJVH firmware only. Every root
works fine only for the firmware with which it’s supposed to work.
Check your firmware in settings – about phone.
Make sure you’re trying the root on the XWJVH firmware only. Every root
works fine only for the firmware with which it’s supposed to work.
Check your firmware in settings – about phone.
hi, i’m Terrence. I follow your rooting instruction as at https://nerdschalk.com/how-to-root-xwjvh-android-2-3-3-rom-for-galaxy-s-i9000/….after step 12 “After the CF Root is installed, phone will restart.”..however, my galaxy s is keep repeating with the screen of flashing S (the screen which we normally see when switch on phone)…
what can I do as I was stuck in this screen and not able to get into main page.
hi, i’m Terrence. I follow your rooting instruction as at https://nerdschalk.com/how-to-root-xwjvh-android-2-3-3-rom-for-galaxy-s-i9000/….after step 12 “After the CF Root is installed, phone will restart.”..however, my galaxy s is keep repeating with the screen of flashing S (the screen which we normally see when switch on phone)…
what can I do as I was stuck in this screen and not able to get into main page.
Make sure you’re trying the root on the XWJVH firmware only. Every root
works fine only for the firmware with which it’s supposed to work.
Check your firmware in settings – about phone.
Make sure you’re trying the root on the XWJVH firmware only. Every root
works fine only for the firmware with which it’s supposed to work.
Check your firmware in settings – about phone.
Working like a charme the verry first time! Thanks!
Working like a charme the verry first time! Thanks!
Working like a charme the verry first time! Thanks!
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CMig88m_36kCFeO57Aodm1g_GA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGzitBH343L8ORAng36JihyEnAVUPeB8DJJdo1mFyfIBpKGEjfJjdHkHIC4nWrJ3gLoXi8KwiMCPaIzYHFf2Y3VHjKyhsi-i7TdI1jEespmoCNCgoBY%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CMig88m_36kCFeO57Aodm1g_GA&path=%2Fwelcome%3Fgpinv%3DAGXbFGzitBH343L8ORAng36JihyEnAVUPeB8DJJdo1mFyfIBpKGEjfJjdHkHIC4nWrJ3gLoXi8KwiMCPaIzYHFf2Y3VHjKyhsi-i7TdI1jEespmoCNCgoBY%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CMig88m_36kCFeO57Aodm1g_GA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGzitBH343L8ORAng36JihyEnAVUPeB8DJJdo1mFyfIBpKGEjfJjdHkHIC4nWrJ3gLoXi8KwiMCPaIzYHFf2Y3VHjKyhsi-i7TdI1jEespmoCNCgoBY%26est%3DADH5u8VYmuwUSjLcjYDd58hAHi5yf4tC1WwQ4gAUP_xYBjKaiijhzpnXwoiSsqOQO6cmNN5ByOAZmyY3CsDMZLLYlmxYsJnjC4r2oNuLcqMOZyBGebc7jW790YKUMylb8MYnPGvwAUuoHKYH2G__pZr3gtJM72srvA%26hl%3Den
You received this message because Kapil Malani shared it with
“I hope all of you are getting the much-wanted much-of-a-teaser precious
Google+ Invites from me and are ready to make a leap from the Mark
Zuckerburg’s no-respect-for-privacy Facebook to privacy-respecting suddenly
there social networking attempt — a mind-blowing one, mind you — the
Google+ (by Google, of course). It’s new, and it’s rad — you’ll soon find
out.
Click the “Learn More about Google+” (with orange background) in the email
you are receiving from me to get your much-deserved (since you’re in my
list, :)) chance to try the Google+ social wave that has literally taken the
Internet for the past few days — and I’m sure will continue to do so.
So, see you soon in Google+ Keep in touch. Ta Ta!
P.S. Those of you who are curious about it, hear it directly from the Google
in the link I’ve attached — Google+ Project’s official announcement from
googleblog itself!”
Accept the invitation to view the full post:
https://plus.google.com/_/notifications/ngemlink?&emid=CMig88m_36kCFeO57Aodm1g_GA&path=%2F108100504619519002104%2Fposts%2Fi8Rh5MJd6mC%3Fgpinv%3DAGXbFGzitBH343L8ORAng36JihyEnAVUPeB8DJJdo1mFyfIBpKGEjfJjdHkHIC4nWrJ3gLoXi8KwiMCPaIzYHFf2Y3VHjKyhsi-i7TdI1jEespmoCNCgoBY%26hl%3Den
The Google+ project is currently working out all the kinks with a small
group of testers. If you’re not able to access Google+, please check back
again soon. Learn more:
https://plus.google.com/_/notifications/ngemlink?&emid=CMig88m_36kCFeO57Aodm1g_GA&path=%2Fwelcome%3Fgpinv%3DAGXbFGzitBH343L8ORAng36JihyEnAVUPeB8DJJdo1mFyfIBpKGEjfJjdHkHIC4nWrJ3gLoXi8KwiMCPaIzYHFf2Y3VHjKyhsi-i7TdI1jEespmoCNCgoBY%26hl%3Den
————————
You received this message because Kapil Malani shared it with
Click here to unsubscribe from these
emails:
https://plus.google.com/_/notifications/ngemlink?&emid=CMig88m_36kCFeO57Aodm1g_GA&path=%2Fnonplus%2Femailsettings%3Fgpinv%3DAGXbFGzitBH343L8ORAng36JihyEnAVUPeB8DJJdo1mFyfIBpKGEjfJjdHkHIC4nWrJ3gLoXi8KwiMCPaIzYHFf2Y3VHjKyhsi-i7TdI1jEespmoCNCgoBY%26est%3DADH5u8VYmuwUSjLcjYDd58hAHi5yf4tC1WwQ4gAUP_xYBjKaiijhzpnXwoiSsqOQO6cmNN5ByOAZmyY3CsDMZLLYlmxYsJnjC4r2oNuLcqMOZyBGebc7jW790YKUMylb8MYnPGvwAUuoHKYH2G__pZr3gtJM72srvA%26hl%3Den
i followed these seps and its works like a charm.. but as we heard android 2.3 s officially released for galaxy s .i would like to install that..s it possible for me to ??? how do i go back to 2.2 official version so i can do via kies
Install the latest firmware available in your country. The procedure for
every firmware is same. Find the latest one for your country (froyo or
gingerbread, your choice) at SamFirmware.com — download it and install it.
If you download froyo firmware, Kies should be able to upgrade it to
Gingerbread.
Install the latest firmware available in your country. The procedure for
every firmware is same. Find the latest one for your country (froyo or
gingerbread, your choice) at SamFirmware.com — download it and install it.
If you download froyo firmware, Kies should be able to upgrade it to
Gingerbread.
thank u very much..will try it..
i followed these seps and its works like a charm.. but as we heard android 2.3 s officially released for galaxy s .i would like to install that..s it possible for me to ??? how do i go back to 2.2 official version so i can do via kies
Install the latest firmware available in your country. The procedure for
every firmware is same. Find the latest one for your country (froyo or
gingerbread, your choice) at SamFirmware.com — download it and install it.
If you download froyo firmware, Kies should be able to upgrade it to
Gingerbread.
thank u very much..will try it..
i followed these seps and its works like a charm.. but as we heard android 2.3 s officially released for galaxy s .i would like to install that..s it possible for me to ??? how do i go back to 2.2 official version so i can do via kies
Install the latest firmware available in your country. The procedure for
every firmware is same. Find the latest one for your country (froyo or
gingerbread, your choice) at SamFirmware.com — download it and install it.
If you download froyo firmware, Kies should be able to upgrade it to
Gingerbread.
thank u very much..will try it..
Works Great Thanks!
But now my battery is not lasting much, I also Chainfire3D, maybe that’s the villan… You guys rock!
Works Great Thanks!
But now my battery is not lasting much, I also Chainfire3D, maybe that’s the villan… You guys rock!
Works Great Thanks!
But now my battery is not lasting much, I also Chainfire3D, maybe that’s the villan… You guys rock!
awsum thanks…u cousins are genius!!
awsum thanks…u cousins are genius!!
awsum thanks…u cousins are genius!!
works like a charm 🙂
hi.. i would like to know whether can i root my samsung galaxy s m110s through the way shown above?
hi.. i would like to know whether can i root my samsung galaxy s m110s through the way shown above?
hi.. i would like to know whether can i root my samsung galaxy s m110s through the way shown above?
GREAT!!!
I almost give up after several attempt on rooting and unlocking my SGS. But then I found this blog (and your excellent step-by-step on how to root Android 2.3.3) … and finally, my SGS’s free … ha ha.
Thanks a lot.
You are welcome, bro!
GREAT!!!
I almost give up after several attempt on rooting and unlocking my SGS. But then I found this blog (and your excellent step-by-step on how to root Android 2.3.3) … and finally, my SGS’s free … ha ha.
Thanks a lot.
You are welcome, bro!
GREAT!!!
I almost give up after several attempt on rooting and unlocking my SGS. But then I found this blog (and your excellent step-by-step on how to root Android 2.3.3) … and finally, my SGS’s free … ha ha.
Thanks a lot.
You are welcome, bro!
the computer and phone icons with the dashed line between them and a yellow sign on the dashed line. its not working some 1 plz help now i cant turn the phone on and i cant go to download mode
please somebody helpp !!
Are you in recovery mode?
the computer and phone icons with the dashed line between them and a yellow sign on the dashed line. its not working some 1 plz help now i cant turn the phone on and i cant go to download mode
please somebody helpp !!
Are you in recovery mode?
the computer and phone icons with the dashed line between them and a yellow sign on the dashed line. its not working some 1 plz help now i cant turn the phone on and i cant go to download mode
please somebody helpp !!
Are you in recovery mode?
After rooting using this guide is the boot-up sound supposed to be disabled because there is no sound when I turn my i9000 on, it only shows the stock boot animation?
Yes, it’s supposed to be like that.
Thanxs for the reply but is there anyway to put it back, I would prefer to hear the boot-up sound if possible!?
None I know of… 🙁
After rooting using this guide is the boot-up sound supposed to be disabled because there is no sound when I turn my i9000 on, it only shows the stock boot animation?
Yes, it’s supposed to be like that.
Thanxs for the reply but is there anyway to put it back, I would prefer to hear the boot-up sound if possible!?
None I know of… 🙁
After rooting using this guide is the boot-up sound supposed to be disabled because there is no sound when I turn my i9000 on, it only shows the stock boot animation?
Yes, it’s supposed to be like that.
Thanxs for the reply but is there anyway to put it back, I would prefer to hear the boot-up sound if possible!?
None I know of… 🙁
Odin cant find my phone in “downloading”-mode.. only when its on in normal mode.. help pls
Odin cant find my phone in “downloading”-mode.. only when its on in normal mode.. help pls
Odin cant find my phone in “downloading”-mode.. only when its on in normal mode.. help pls
plz somebody give me a hand here.Trying to root i did something wrong and my phone has stuck showing on the screen a small icon of a mobile and computer lined with a ! between them.In andition i can’t restart my phone.Plz help…
Your firmware was xxjvh, on which you tried this root, right?
If nothing else, search xxjvs here and install that firmware. Then, root using the link provided there.
You’ll be fine, don’t worry.
thanks.I’ll try install it
i made a test on my phone and here it comes;
PDA:I9000XWJVH
PHONE:I9000XXJVO
CSC:I9000XENJV4
Build info:wed may 4 18:03:59 KST 2011
Also,checking my ROM in Titanium backup i realised that it’s full.just a small space left.I’m missing something…Give me your light plz
plz somebody give me a hand here.Trying to root i did something wrong and my phone has stuck showing on the screen a small icon of a mobile and computer lined with a ! between them.In andition i can’t restart my phone.Plz help…
Your firmware was xxjvh, on which you tried this root, right?
If nothing else, search xxjvs here and install that firmware. Then, root using the link provided there.
You’ll be fine, don’t worry.
thanks.I’ll try install it
i made a test on my phone and here it comes;
PDA:I9000XWJVH
PHONE:I9000XXJVO
CSC:I9000XENJV4
Build info:wed may 4 18:03:59 KST 2011
Also,checking my ROM in Titanium backup i realised that it’s full.just a small space left.I’m missing something…Give me your light plz
plz somebody give me a hand here.Trying to root i did something wrong and my phone has stuck showing on the screen a small icon of a mobile and computer lined with a ! between them.In andition i can’t restart my phone.Plz help…
Your firmware was xxjvh, on which you tried this root, right?
If nothing else, search xxjvs here and install that firmware. Then, root using the link provided there.
You’ll be fine, don’t worry.
thanks.I’ll try install it
i made a test on my phone and here it comes;
PDA:I9000XWJVH
PHONE:I9000XXJVO
CSC:I9000XENJV4
Build info:wed may 4 18:03:59 KST 2011
Also,checking my ROM in Titanium backup i realised that it’s full.just a small space left.I’m missing something…Give me your light plz
i made a test on my phone and here it comes;
PDA:I9000XWJVH
PHONE:I9000XXJVO
CSC:I9000XENJV4
Build info:wed may 4 18:03:59 KST 2011
Also,checking
my ROM in Titanium backup i realised that it’s full.just a small space
left.I’m missing something…Give me your light plz
i made a test on my phone and here it comes;
PDA:I9000XWJVH
PHONE:I9000XXJVO
CSC:I9000XENJV4
Build info:wed may 4 18:03:59 KST 2011
Also,checking
my ROM in Titanium backup i realised that it’s full.just a small space
left.I’m missing something…Give me your light plz
i made a test on my phone and here it comes;
PDA:I9000XWJVH
PHONE:I9000XXJVO
CSC:I9000XENJV4
Build info:wed may 4 18:03:59 KST 2011
Also,checking
my ROM in Titanium backup i realised that it’s full.just a small space
left.I’m missing something…Give me your light plz
Tried doing this – unfortunately, after the first restart, the phone is stuck at the ‘Galaxy S GT-19000’ screen and is not going into the S animation. Please help 🙁
– D
Actually, don’t bother. Re-did the steps. I think I used the wrong TAR file (I know, I know). Phone rooted, couldn’t have been simpler. Thanks so much 🙂
Tried doing this – unfortunately, after the first restart, the phone is stuck at the ‘Galaxy S GT-19000’ screen and is not going into the S animation. Please help :(n- D
Actually, don’t bother. Re-did the steps. I think I used the wrong TAR file (I know, I know). Phone rooted, couldn’t have been simpler. Thanks so much 🙂
Tried doing this – unfortunately, after the first restart, the phone is stuck at the ‘Galaxy S GT-19000’ screen and is not going into the S animation. Please help :(n- D
Actually, don’t bother. Re-did the steps. I think I used the wrong TAR file (I know, I know). Phone rooted, couldn’t have been simpler. Thanks so much 🙂
Tried doing this – unfortunately, after the first restart, the phone is stuck at the ‘Galaxy S GT-19000’ screen and is not going into the S animation. Please help 🙁
– D
Actually, don’t bother. Re-did the steps. I think I used the wrong TAR file (I know, I know). Phone rooted, couldn’t have been simpler. Thanks so much 🙂
hi, worked perfect. thanks
hi, worked perfect. thanks
hi, worked perfect. thanks
Thanks Man worked like a dream, quick, easy and no risk of ruining the phone.
Good Job 🙂
Thanks Man worked like a dream, quick, easy and no risk of ruining the phone.
Good Job 🙂
Thanks Man worked like a dream, quick, easy and no risk of ruining the phone.
Good Job 🙂
its not working…
plz help..
its not working…
plz help..
its not working…
plz help..
works fine thanx
works fine thanx
works fine thanx
First time rooting! And it worked! Thanks man! I was worried I was going to brick my Samsung Galaxy S1. Nice clear instructions. If you don’t wanna brick, then read the instructions carefully.
Thnx man. Btw, new firmwares like xxjvs and xxjvu are much better. Search this site for download links and install instructions for both xxjvs and xxjvu.
First time rooting! And it worked! Thanks man! I was worried I was going to brick my Samsung Galaxy S1. Nice clear instructions. If you don’t wanna brick, then read the instructions carefully.
Thnx man. Btw, new firmwares like xxjvs and xxjvu are much better. Search this site for download links and install instructions for both xxjvs and xxjvu.
First time rooting! And it worked! Thanks man! I was worried I was going to brick my Samsung Galaxy S1. Nice clear instructions. If you don’t wanna brick, then read the instructions carefully.
Thnx man. Btw, new firmwares like xxjvs and xxjvu are much better. Search this site for download links and install instructions for both xxjvs and xxjvu.
Just rooted my phone for the first time!! Worked brilliantly, no problems at all! 😀
Thank you for a nice guide and thanks to Chainfire for making the root Kernel!! 😀
WOW! It was so much simpler than i thought!
Just rooted my phone for the first time!! Worked brilliantly, no problems at all! 😀
Thank you for a nice guide and thanks to Chainfire for making the root Kernel!! 😀
WOW! It was so much simpler than i thought!
Just rooted my phone for the first time!! Worked brilliantly, no problems at all! 😀
Thank you for a nice guide and thanks to Chainfire for making the root Kernel!! 😀
WOW! It was so much simpler than i thought!
The only reason I haven’t tried rooting yet is cause I can’t find some simple info: Do you reset your phone doing this? Only reason I want to root is to back up my applications with Titanium so I don’t lose data but if the rooting itself resets everything there’s no point, is there?
Just curious cause I’ve seen other roots where there’s no change other than getting root access, which is what I want.
Rooting the phone only gets you root access… it doesn’t delete your data or anything. So don’t worry about that at all.
Thanks for quite a quick reply mate. Great news. I’ll get on with it then!
Also reason I will is cause I got a Galaxy SII LTE recently. Any chance root is out for that phone? I live in sweden so it’s the international version I guess.
As a sidenote, my phone’s been in “Download-mode” for some time now. Odin just says
Added!!
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Nothing has changed. How long is this supposed to take anyhow?
Never mind this msg. I switched it off, the icon “phone – ! – computer” was on so I took out the battery. Put it back in, booted “Download-mode” and did all the steps. No prob. My question down there V still remains tho 🙂
Hey, it’s not for Galaxy S2 LTE. It is only for Galaxy S i9000, on XWJVH firmware. If your phone is S2 LTE, do not use this.
And I didn’t get your English, man… if you are asking for S2 LTE root, well it is available.
I will get you link to S2 LTE root later. I am sure it is available.
That’s very nice. Thanks. I’ll keep watching this section for a future comment. Oh, btw, here’s the version:
GINGERBREAD.XXLC2Baseband: I9210XXLB3
Android 2.3.6
Okies 🙂
The only reason I haven’t tried rooting yet is cause I can’t find some simple info: Do you reset your phone doing this? Only reason I want to root is to back up my applications with Titanium so I don’t lose data but if the rooting itself resets everything there’s no point, is there?
Just curious cause I’ve seen other roots where there’s no change other than getting root access, which is what I want.
Rooting the phone only gets you root access… it doesn’t delete your data or anything. So don’t worry about that at all.
Thanks for quite a quick reply mate. Great news. I’ll get on with it then!
Also reason I will is cause I got a Galaxy SII LTE recently. Any chance root is out for that phone? I live in sweden so it’s the international version I guess.
Hey, it’s not for Galaxy S2 LTE. It is only for Galaxy S i9000, on XWJVH firmware. If your phone is S2 LTE, do not use this.
And I didn’t get your English, man… if you are asking for S2 LTE root, well it is available.
As a sidenote, my phone’s been in “Download-mode” for some time now. Odin just says
Added!!
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Nothing has changed. How long is this supposed to take anyhow?
Never mind this msg. I switched it off, the icon “phone – ! – computer” was on so I took out the battery. Put it back in, booted “Download-mode” and did all the steps. No prob. My question down there V still remains tho 🙂
I will get you link to S2 LTE root later. I am sure it is available.
That’s very nice. Thanks. I’ll keep watching this section for a future comment. Oh, btw, here’s the version:
GINGERBREAD.XXLC2Baseband: I9210XXLB3
Android 2.3.6
Okies 🙂
The only reason I haven’t tried rooting yet is cause I can’t find some simple info: Do you reset your phone doing this? Only reason I want to root is to back up my applications with Titanium so I don’t lose data but if the rooting itself resets everything there’s no point, is there?
Just curious cause I’ve seen other roots where there’s no change other than getting root access, which is what I want.
Rooting the phone only gets you root access… it doesn’t delete your data or anything. So don’t worry about that at all.
Thanks for quite a quick reply mate. Great news. I’ll get on with it then!
Also reason I will is cause I got a Galaxy SII LTE recently. Any chance root is out for that phone? I live in sweden so it’s the international version I guess.
Hey, it’s not for Galaxy S2 LTE. It is only for Galaxy S i9000, on XWJVH firmware. If your phone is S2 LTE, do not use this.
And I didn’t get your English, man… if you are asking for S2 LTE root, well it is available.
As a sidenote, my phone’s been in “Download-mode” for some time now. Odin just says
Added!!
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Nothing has changed. How long is this supposed to take anyhow?
Never mind this msg. I switched it off, the icon “phone – ! – computer” was on so I took out the battery. Put it back in, booted “Download-mode” and did all the steps. No prob. My question down there V still remains tho 🙂
I will get you link to S2 LTE root later. I am sure it is available.
That’s very nice. Thanks. I’ll keep watching this section for a future comment. Oh, btw, here’s the version:
GINGERBREAD.XXLC2Baseband: I9210XXLB3
Android 2.3.6
Okies 🙂
Hi…
Will it work also on baseband version I9000JHJV9?
thanks!
I wouldn’t recommend this for your firmware. Actually, it might work, but still won’t recommend it.
Better root your phone with superoneclick root tool, find it here – http://forum.xda-developers.com/showthread.php?t=803682 -This should work well for you. Then install ROM Manager app from android market/play store and install Flash Clockworkmod Recovery using that.
its not showing the added messege in messege box …what i do now???
Did you install the drivers?
Hi…
Will it work also on baseband version I9000JHJV9?
thanks!
I wouldn’t recommend this for your firmware. Actually, it might work, but still won’t recommend it.
Better root your phone with superoneclick root tool, find it here – http://forum.xda-developers.com/showthread.php?t=803682 -This should work well for you. Then install ROM Manager app from android market/play store and install Flash Clockworkmod Recovery using that.
Hi…
Will it work also on baseband version I9000JHJV9?
thanks!
I wouldn’t recommend this for your firmware. Actually, it might work, but still won’t recommend it.
Better root your phone with superoneclick root tool, find it here – http://forum.xda-developers.com/showthread.php?t=803682 -This should work well for you. Then install ROM Manager app from android market/play store and install Flash Clockworkmod Recovery using that.
its not showing the added messege in messege box …what i do now???
Did you install the drivers?
its not showing the added messege in messege box …what i do now???
Did you install the drivers?
I did the process but after start it showed failed. Now I cannot switch on my phone. I get an image with a phone and a dektop computer with an exclamation mark in between. Please help. What can I do to restore my phone.
I cannot even switch off my phone. It switch off only by talking off the battery
I did the process again and it worked. I have rooted phone. Thank you.
I did the process but after start it showed failed. Now I cannot switch on my phone. I get an image with a phone and a dektop computer with an exclamation mark in between. Please help. What can I do to restore my phone.
I did the process but after start it showed failed. Now I cannot switch on my phone. I get an image with a phone and a dektop computer with an exclamation mark in between. Please help. What can I do to restore my phone.
I cannot even switch off my phone. It switch off only by talking off the battery
I cannot even switch off my phone. It switch off only by talking off the battery
I did the process again and it worked. I have rooted phone. Thank you.
I did the process again and it worked. I have rooted phone. Thank you.
Does the baseband verion have anything to do with this?
Yes, build number needs to be same as that of root guide you are looking to follow. What’s your phone’s build number under settings – about phone?
*version
Does the baseband verion have anything to do with this?
Yes, build number needs to be same as that of root guide you are looking to follow. What’s your phone’s build number under settings – about phone?
Does the baseband verion have anything to do with this?
Yes, build number needs to be same as that of root guide you are looking to follow. What’s your phone’s build number under settings – about phone?
*version
*version
Yeah I just got stuck in a re-boot loop too
Yeah I just got stuck in a re-boot loop too
Yeah I just got stuck in a re-boot loop too
when i connect phone to computer in downloading mode, the pc not recognised the phone.. but all other usb devises and phone (normal mode or storage mode) recognising.. what should i do… help me !!
when i connect phone to computer in downloading mode, the pc not recognised the phone.. but all other usb devises and phone (normal mode or storage mode) recognising.. what should i do… help me !!
when i connect phone to computer in downloading mode, the pc not recognised the phone.. but all other usb devises and phone (normal mode or storage mode) recognising.. what should i do… help me !!
Just rooted my phone for the first time!! Worked brilliantly, no problems at all! so Thanks BOSS…………………………………………
Just rooted my phone for the first time!! Worked brilliantly, no problems at all! so Thanks BOSS…………………………………………
Just rooted my phone for the first time!! Worked brilliantly, no problems at all! so Thanks BOSS…………………………………………
I tried to rooted my Galaxy S with Android 2.3.3 (XWJVH-*) with your instructions, however the phone restarts as soon as it finishes to boot and typing in the PIN code.
When I rootet it, it first did not work and the phone got stuck in the download mode:
Added!!
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
I did the same as GuestOfHonour to take out the battery and redo the whole procedure. I can access the mode when pressing VolUP+Home+Power, thus the flashing worked.
How can I fix this restart problem?
I tried to rooted my Galaxy S with Android 2.3.3 (XWJVH-*) with your instructions, however the phone restarts as soon as it finishes to boot and typing in the PIN code.
When I rootet it, it first did not work and the phone got stuck in the download mode:
Added!!
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
I did the same as GuestOfHonour to take out the battery and redo the whole procedure. I can access the mode when pressing VolUP+Home+Power, thus the flashing worked.
How can I fix this restart problem?
I tried to rooted my Galaxy S with Android 2.3.3 (XWJVH-*) with your instructions, however the phone restarts as soon as it finishes to boot and typing in the PIN code.
When I rootet it, it first did not work and the phone got stuck in the download mode:
Added!!
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
I did the same as GuestOfHonour to take out the battery and redo the whole procedure. I can access the mode when pressing VolUP+Home+Power, thus the flashing worked.
How can I fix this restart problem?
Do you need 7-zip or any other program? And what do you mean with “unzip” the file above? As he does on the video he just “extract here”, and get the .tar file.
Do you need 7-zip or any other program? And what do you mean with “unzip” the file above? As he does on the video he just “extract here”, and get the .tar file.
Do you need 7-zip or any other program? And what do you mean with “unzip” the file above? As he does on the video he just “extract here”, and get the .tar file.
YES I DID IT! Thanks a lot! 🙂
YES I DID IT! Thanks a lot! 🙂
YES I DID IT! Thanks a lot! 🙂
excellent guide…much appreciated!
excellent guide…much appreciated!
excellent guide…much appreciated!
10q its work
10q its work
10q its work
Great, wasn’t able to get CWM going the usual way.
Great, wasn’t able to get CWM going the usual way.
Great, wasn’t able to get CWM going the usual way.