Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components. Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device. To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-G900P! Do not use the procedures discussed here on any other Galaxy S5 (including the Galaxy S5 variant at T-Mobile, US Cellular, Verizon, AT&T and other International variants) or any other device of Samsung or any other company. You have been warned! Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too. For help on Backup and Restore, check out our exclusive page on that linked right below. ► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Sprint Galaxy S5. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy S5 on your computer. ► SAMSUNG GALAXY S5 DRIVERS INSTALLATION GUIDE Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy. DOWNLOAD LINK | File name: Latest Odin3 v3.09.zip (951 KB) DOWNLOAD LINK | File name: G900PVPU1ANCB_G900PSPT1ANCB_SPR.zip (1.5 GB) Example video: If you haven’t used Odin before to install a stock firmware or anything else, then we suggest you first watch a video of that to get familiar with the process. The video demonstrates flashing of CWM Recovery on Galaxy S3, but since the procedure is same for flashing stock firmware also, the video will help: Click here to watch the video Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might format internal sd card too, your files will remain safe on PC. If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy S5 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again. Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your S5 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again. It was easy to flash stock KitKat 4.4.2 firmware on your Sprint Galaxy S5, right? Let us know in comments below. Your suggestions and queries, if any, are most welcomed!STOCK FIRMWARE INFO
Firmware Version
G900PVPU1ANCB
Android Version
Android KitKat 4.4.2
Is this Official?
Yes! This is the official update by Sprint.
Release Date
April 2014
Credits
SamMobile
WARNING!
SPRINT GALAXY S5 SM-G900P OFFICIAL KITKAT 4.4.2 FIRMWARE
STEP 0: CHECK DEVICE MODEL NO.
STEP 1: BACKUP YOUR DEVICE
STEP 2: INSTALL LATEST DRIVER
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADS
ODIN ZIP FILE
FIRMWARE ZIP FILE
STEP-BY-STEP GUIDE
If you don’t get the Added! message, here are some troubleshooting tips:
FEEDBACK US!
Back To Stock/Downgrade Sprint Galaxy S5 SM-G900P to Android 4.4.2 KitKat and Samsung TouchWiz
25 Comments
Comments are closed.
hello, anyone here able to help me. nicolethebeau@charter.net. thanks jim
hello, anyone here able to help me. nicolethebeau@charter.net. thanks jim
hello, anyone here able to help me. nicolethebeau@charter.net. thanks jim
Muchas Gracias, ya habia hecho esto mismo pero con un samsung galaxy advance hace un par de años pero ahora que regrese de nuevo a Samsung debia de recordar algunas cosillas. Sigue siendo sencillo.
Muchas Gracias, ya habia hecho esto mismo pero con un samsung galaxy advance hace un par de años pero ahora que regrese de nuevo a Samsung debia de recordar algunas cosillas. Sigue siendo sencillo.
Muchas Gracias, ya habia hecho esto mismo pero con un samsung galaxy advance hace un par de años pero ahora que regrese de nuevo a Samsung debia de recordar algunas cosillas. Sigue siendo sencillo.
It always fails with this message
Initialzation..
Get PIT for mapping..
Firmware update start..
aboot.mbn
NAND Write Start!!
FAIL! (Auth)
All threads completed. (succeed 0 / failed 1)
Can please somebody help me, I repeated the step 6 as mentioned above in the guide but still no luck.
Use original cable, and try changing USB port on PC. When you get Added!! message in Odin, it means you have drivers installed and working… there is only some little problem preventing you.
Thank you for reply, I tried with many cables. I think that’s not the issue.
It always fails with this message
Initialzation..
Get PIT for mapping..
Firmware update start..
aboot.mbn
NAND Write Start!!
FAIL! (Auth)
All threads completed. (succeed 0 / failed 1)
Can please somebody help me, I repeated the step 6 as mentioned above in the guide but still no luck.
Use original cable, and try changing USB port on PC. When you get Added!! message in Odin, it means you have drivers installed and working… there is only some little problem preventing you.
Thank you for reply, I tried with many cables. I think that’s not the issue.
It always fails with this message
Initialzation..
Get PIT for mapping..
Firmware update start..
aboot.mbn
NAND Write Start!!
FAIL! (Auth)
All threads completed. (succeed 0 / failed 1)
Can please somebody help me, I repeated the step 6 as mentioned above in the guide but still no luck.
Use original cable, and try changing USB port on PC. When you get Added!! message in Odin, it means you have drivers installed and working… there is only some little problem preventing you.
Thank you for reply, I tried with many cables. I think that’s not the issue.
coo me logeo
coo me logeo
error! like nadeem. ;[
error! like nadeem. ;[
This is the most inconsequential tutorial I have ever read. If you do the instructions in this article, the result will be worth it and your phone will be damaged even die EMMC. Caution, this article is very misleading and NOT LIKELY to succeed.
to Downgrade, not sesedehana. Flash should be done in full and do not here’s how.
This is the most inconsequential tutorial I have ever read. If you do the instructions in this article, the result will be worth it and your phone will be damaged even die EMMC. Caution, this article is very misleading and NOT LIKELY to succeed.
to Downgrade, not this. Flash should be done in full and do not here’s how.
This is the most inconsequential tutorial I have ever read. If you do the instructions in this article, the result will be worth it and your phone will be damaged even die EMMC. Caution, this article is very misleading and NOT LIKELY to succeed.
to Downgrade, not sesedehana. Flash should be done in full and do not here’s how.
This is the most inconsequential tutorial I have ever read. If you do the instructions in this article, the result will be worth it and your phone will be damaged even die EMMC. Caution, this article is very misleading and NOT LIKELY to succeed.
to Downgrade, not this. Flash should be done in full and do not here’s how.
Message log from ODIN:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar .md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
aboot.mbn
NAND Write Start!!
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Message log from ANDROID:
ODIN MODE
PRODUCT NAME: SM-G900P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
KNOX WARRANTY VOID: 0X1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T3, R1, A3, P1
SECURE DOWNLOAD: ENABLE
UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1
Message log from ODIN:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar .md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
aboot.mbn
NAND Write Start!!
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Message log from ANDROID:
ODIN MODE
PRODUCT NAME: SM-G900P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
KNOX WARRANTY VOID: 0X1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T3, R1, A3, P1
SECURE DOWNLOAD: ENABLE
UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1