Galaxy On7 Firmware download [stock ROM, all variants]

It’s good to keep a firmware downloaded on PC, so that in case anything goes wrong with your Galaxy On7 that’s not hardware-break/fault, you can restore the device back to stock using the firmware.

The direct download link provided below of Galaxy On7 firmware get you better and faster speed than others, and are thus a good alternative to sammobile.com and samsung-updates.com. You don’t need to look for mega and google drive links for Samsung firmware thanks to the links below.

Samsung Galaxy On7 Firmware

Galaxy On7 2015

Model	Date	Software version \| Android version	Free Download Link
SM-G600F	28 Dec 2016	G600FXXU1APL3 \| Android 6.0.1 Marshmallow	G600FXXU1APL3_G600FOJV1APL3_TUR.zip
SM-G600F	01 Dec 2016	G600FXXU1APL1 \| Android 6.0.1 Marshmallow	G600FXXU1APL1_G600FOJV1APL1_TUR.zip
SM-G600F	19 Oct 2016	G600FXXU1APJ3 \| Android 6.0.1 Marshmallow	G600FXXU1APJ3_G600FOJV1APJ3_TUR.zip
SM-G600F	19 Jul 2016	G600FXXU1APG1 \| Android 6.0.1 Marshmallow	G600FXXU1APG1_G600FOJV1APG1_TUR.zip
SM-G600F	27 Jun 2016	G600FXXU1APF9 \| Android 6.0.1 Marshmallow	G600FXXU1APF9_G600FOJV1APF9_TUR.zip
SM-G600F	16 Jun 2016	G600FXXU1APF8 \| Android 6.0.1 Marshmallow	G600FXXU1APF8_G600FOJV1APF8_TUR.zip
SM-G600FY	28 Mar 2017	G600FYXXU1BQC6 \| Android 6.0.1 Marshmallow	G600FYXXU1BQC6_G600FYODD1BQF1_INS.zip
SM-G600FY	08 Dec 2016	G600FYXXU1BPL2 \| Android 6.0.1 Marshmallow	G600FYXXU1BPL2_G600FYODD1BPL1_SLK.zip
SM-G600FY	10 Nov 2016	G600FYXXU1BPK1 \| Android 6.0.1 Marshmallow	G600FYXXU1BPK1_G600FYODD1BPK1_INS.zip
SM-G600FY	17 Oct 2016	G600FYXXU1BPJ3 \| Android 6.0.1 Marshmallow	G600FYXXU1BPJ3_G600FYODD1BPJ2_INS.zip
SM-G600FY	27 Jul 2016	G600FYXXU1BPG6 \| Android 6.0.1 Marshmallow	G600FYXXU1BPG6_G600FYODD1BPG5_INS.zip
SM-G600FY	30 May 2016	G600FYXXU1APE6 \| Android 5.1.1 Lollipop	G600FYXXU1APE6_G600FYOJV1APE5_XSG.zip
SM-G600FY	12 Apr 2016	G600FYXXU1APD5 \| Android 5.1.1 Lollipop	G600FYXXU1APD5_G600FYODD1APD5_SLK.zip
SM-G600FY	19 Mar 2016	G600FYXXU1APC5 \| Android 5.1.1 Lollipop	G600FYXXU1APC5_G600FYODD1APC3_INS.zip
SM-G600FY	28 Dec 2015	G600FYXXU1AOL2 \| Android 5.1.1 Lollipop	G600FYXXU1AOL2_G600FYODD1AOL2_INS.zip
SM-G600FY	30 Nov 2015	G600FYXXU1AOK7 \| Android 5.1.1 Lollipop	G600FYXXU1AOK7_G600FYODD1AOK7_INS.zip
SM-G600FY	14 Oct 2015	G600FYXXU1AOJ1 \| Android 5.1.1 Lollipop	G600FYXXU1AOJ1_G600FYODD1AOJ1_INS.zip
SM-G600FY	02 Jun 2017	G600FYDDU1BQF1 \| Android 6.0.1 Marshmallow	G600FYDDU1BQF1_G600FYODD1BQF2_INS.zip
SM-G600FY	28 Mar 2017	G600FYDDU1BQC6 \| Android 6.0.1 Marshmallow	G600FYDDU1BQC6_G600FYODD1BQC6_INS.zip
SM-G600FY	08 Dec 2016	G600FYDDU1BPL2 \| Android 6.0.1 Marshmallow	G600FYDDU1BPL2_G600FYODD1BPL1_INS.zip
SM-G600FY	10 Nov 2016	G600FYDDU1BPK1 \| Android 6.0.1 Marshmallow	G600FYDDU1BPK1_G600FYODD1BPK1_INS.zip
SM-G600FY	14 Oct 2016	G600FYDDU1BPJ2 \| Android 6.0.1 Marshmallow	G600FYDDU1BPJ2_G600FYODD1BPJ2_INS.zip
SM-G600FY	14 Sep 2016	G600FYDDU1BPI1 \| Android 6.0.1 Marshmallow	G600FYDDU1BPI1_G600FYODD1BPH1_INS.zip
SM-G600FY	01 Aug 2016	G600FYDDU1BPH1 \| Android 6.0.1 Marshmallow	G600FYDDU1BPH1_G600FYODD1BPH1_INS.zip
SM-G600FY	20 Jun 2016	G600FYDDU1BPF7 \| Android 6.0.1 Marshmallow	G600FYDDU1BPF7_G600FYODD1BPF6_INS.zip

Galaxy On7 2016

Samsung released the On7 2016 as model no. SM-G6100 in China, but it’s the calling the same device J7 Prime in other markets, where it carries model no. SM-G610M, for which you shall find firmware in the J7 firmware page of ours.

Galaxy On7 refresh

Model	Date	Software version \| Android version	Free Download Link
SM-G611K	12 Feb 2018	G611KKKU1ARA4 \| Android 7.1.1 Nougat	G611KKKU1ARA4_G611KKTC1ARA4_KTC.zip
SM-G611L	12 Feb 2018	G611LKLU1ARA4 \| Android 7.1.1 Nougat	G611LKLU1ARA4_G611LLUC1ARA4_LUC.zip
SM-G611M	16 Mar 2018	G611MUBU1ARC1 \| Android 7.1.1 Nougat	G611MUBU1ARC1_G611MUUB1ARC3_CHO.zip
SM-G611S	12 Feb 2018	G611SKSU1ARA4 \| Android 7.1.1 Nougat	G611SKSU1ARA4_G611SSKC1ARA4_SKC.zip

How to download the correct firmware file

This is an important part!

Be sure to check and find the correct model no. of your Galaxy On7. Then, based on your device’s model no., look for the appropriate firmware build from above.

You can identify the model no. using an app called Droid Info, or simply check it on its packaging box, or under Settings > About. Another solid trick would be to look at the packaging box of your device (in case you can’t power on the device because it is bricked).

Now that you know the model no., download the latest firmware from above for that model no. exactly.

Next, install the firmware on your Galaxy On7 by following the guide linked right below.

How to install a firmware

First, read our disclaimer, then take backup and then follow the guide below to install the firmware.

Disclaimer: Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Backup, backup, backup! Create an appropriate backup of contacts, pictures, videos, songs and other important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have a backup of all your important files. Sometimes, firmware installation may delete everything on your device! Like, when you change the CSC of your device, knowingly or not.

Step-by-step Firmware Installation Guide

Let’s see how to install the firmware on your Galaxy On7. Make sure you have more than 30% battery on your device.

Step 1. Make sure you have downloaded the correct firmware file on your PC. See above for how to download correct firmware file for your Galaxy On7 and download links.

Step 2. Install Samsung USB driver (method 1 on the linked page) first of all. Double-click the .exe file of drivers to begin the installation. (Not required if you have already done this.)

Step 3. Also, download Odin PC software (latest version).

Step 4. Extract the firmware file now. You can use a free software like 7-zip for this. Install 7-zip, then right click on firmware file and under 7-zip, select ‘Extract here’. You should get a file in .tar.md5 format now. (You may get 4 or more files, with AP, BL, CP or CSC etc. written at the beginning of those files.) We will be loading this file into Odin, to be installed on the device (in step 10 below).

Step 5. Extract the Odin file. You should get the Odin exe file (other files could be hidden, hence not visible).

Step 6. Disconnect your Galaxy On7 from PC if it is connected.

Step 7. Boot into download mode:

Power off your device. Wait for 6-7 seconds after screen goes off.
Press and hold the three buttons Volume down + Home + Power together until you see the Warning screen.
Press Volume Up to continue to download mode.

Step 8. Double click on Odin .exe file (from step 5) to open the Odin window as shown below. Be careful with Odin, and do just as said to prevent problems.

Step 9. Connect your device now using the USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in the bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
You can try different USB ports on your PC too.

Step 10. Load the firmware file into Odin. Click the AP button on Odin and the select the .tar.md5 file from above.

Load the firmware files(s) on your device. This depends on how many files you got in step 4 above upon extracting the firmware .zip file.

Case 1: If you got a single .tar/.tar.md5 file, then load this into AP tab of your Odin software. Then go to next step.

To load the file, click on AP tab, select the single firmware file starting with AP text, wait for it to load, and then skip to step 11, ignoring the rest of the part of this step.

Case 2: If you got more than one .tar/.tar.md5 file, then you must be having files starting with AP, CSC, Home_CSC, BL, CP, etc. stuff. In this case, choose the files as follows. Select the firmware files as follows.

Click on BL tab, and select the file beginning with BL text.
Click on AP tab, and select the file beginning with AP text.
Click on CP tab, and select the file beginning with CP text.
[Different] Click on CSC tab, and select the file beginning with HOME_CSC text. If HOME_CSC file isn’t available, then select the file beginning with CSC text.

About CSC file: Using the HOME_CSC file won’t reset your device, and data on the phone shouldn’t be deleted. However, when we select regular CSC file, and it results in CSC on the device being different than that in CSC file, your phone will be formatted automatically. You can even choose to ignore loading the CSC file, that may do alright too. But if it doesn’t work out, repeat the whole process and select CSC file this time around.

Info: When you load files, Odin checks the md5 of firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.

Step 11. Click on Options tab, and make sure Re-partition checkbox is NOT selected. Don’t use PIT tab, ever.

Go back to Log tab now, as it will show the progress of firmware installation when you hit the start button in next step.

Step 12. Verify that everything is okay as mentioned above. When satisfied, click the Start button on Odin now to start flashing the firmware on your device.

Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.

Some errors you may run into, and with respective solution.

If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the file and flash it again as said above.
If you get FAIL in the top left box, then also you need to flash the file again as stated just above.

That’s it. Let the device restart automatically.

The first start of the device may take time, so wait patiently again. When it has, verify the installation. Check the Settings > About device, to confirm new build no. based on the firmware you just installed.

Need help? Be sure to let us know via comments below.

Firmware Benefits

You can use the firmware for a variety of purposes, which includes:

Fix your Galaxy On7 if it’s giving you force closes errors and restarts randomly.
Unbrick your Galaxy On7 if it’s bootlooping and stuck at logo when restarting.
Go Back to Stock on your Galaxy On7 — helps when looking to sell the device, or fix installing OTA updates if broken.
Restore Galaxy On7 to factory state.
Upgrade your Galaxy On7 to newer Android version.
Downgrade your Galaxy On7 to lower build no. at same Android version.
Unroot your Galaxy On7.
Remove custom recovery like TWRP and CWM, if installed, on your Galaxy On7.