The Ulefone Be Touch 3 now has latest version of TWRP recovery available for download and installation, of which we have provided a full guide right below.
TWRP 3.0 packs in new cool features, and a new UI.
Let’s have a look at how to download and install TWRP recovery.
Downloads
Supported devices
- Ulefone Be Touch 3
- Don’t try this on any other device!
Warning!
Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Backup!
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
Ulefone Be Touch 3 TWRP Recovery 3.0
Step 1. Download TWRP recovery and MT6752 scatter file from above.
Step 2. Download Flashtool and extract its zip file to get its content.
Step 3. Go to folder named SP_Flash_Tool (in extracted content from step 2.) and run the flash_tool file.
Step 4. Click on Options menu, and then choose Download tab, and then select the USB Checksum.
Step 5. Now, click on Scatter-Loading button, and then select the MT6752 scatter file you downloaded earlier.
Step 6. Now click on the blank button in recovery row, right to the EMMC_USER area. Select the twrp recovery file you downloaded above.
Step 7. Click the download button now.
Step 8. Power off your Ulefone Be Touch 3.
Step 9. Connect our Touch 3 to computer using USB cable.
Step 10. Installation of TWRP recovery on your device will start. Wait till process is finished.
Step 11. When done, disconnect the device from PC. Now press, Volume Up and Power button together until device restarts.
That’s it. You now have TWRP recovery installed on your Ulefone Be Touch 3. Flash SuperSU file to root it easily.
Need help? Let us know via comments section below.
Discussion