Yes, it’s been so long since we all flashed XXJVR (Android 2.3.4) firmware long back on August 2 and later, while the some portions of the android blogosphere was already beaming with the latest Android 2.3.5 builds of Android OS. So, it was time Samsung showed their supremacy, yet again, with this tiny update too, updating their rockstar Galaxy S (international version GT-i9000) android phone to Android 2.3.5, from 2.3.4 — just an addition of 0.0.1 but says a lot about how hard Sammy’s update team is working on to push timely update. Not only is Samsung the first one to update their phone to Android 2.3.3 and 2.3.4, but now, to 2.3.5 too.
So, without much ado, let’s see XXJVS Android 2.3.5 in flesh on our lovely Galaxy S i9000 — btw, even the mighty Galaxy S II is yet to see Android 2.3.5 builds. And for your information, this Android 2.3.5 update firmware/ROM, XXJVS, is said to be an official leak of Samsung’s team, but like always there is no confirmation from Samsung about that. We’ll know only when XXJVS reaches to consumers using Kies, Samsung’s PC update software.
Before seeing the whole flashing/installation procedure, let’s see warnings and compatibility notes first:
[error]This guide is applicable only for Samsung’s Galaxy S international version (GT-i9000). Check your phone’s version in Settings – About Phone. It has to be “GT-i9000” for this firmware to be compatible with your phone. If it’s not GT-i9000, simply don’t try this ROM on your android handset — don’t even think about it if you care about your android device.[/error]
[warning]The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to you or your device, we won’t be held liable — you only will be responsible, you’ve been warned!!![/warning]
Pre-Installation thoughts:
- Installing/Flashing this ROM will erase your apps and data. So, it’s a very important you back them up, before proceeding further. To backup your apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. Restore APN settings if Internet isn’t working for you. This Android backup guide would help you. And if you’ve rooted your Galaxy S, you can save application’s data too, using Titanium backup (free app on android market) to backup apps with data. And use this this app only again to restore those apps with data.
- Drivers! — it’s important you’ve the proper drivers installed. Download links below:
- If you have Samsung’s PC software Kies installed, un-install it first because it may interrupt the flashing process. If you’ve installed it for sake of drivers which otherwise weren’t working, make sure you exit the Kies completely before beginning the procedure below.
How To Install XXJVS on Galaxy S i9000 (for experienced users)
Well, it’s pretty easy if you’ve already had fun flashing using Odin a decent number of times already. Download XXJVS (password: samfirmware.com) and install it using Odin3 v1.7. Put the *CODE* file in PDA tab, *Modem* file in Phone tab and *multi CSC* file in CSC tab. Put the .pit file in PIT tab and make sure Re-Partition is ticked too. Hit Start!
If you didn’t get what was said above, don’t worry one bit, a detailed guide for you is just below.
Step-By-Step Guide (for not so experienced users)
Although the guide below is very much detailed, step-by-step and sufficient for you to easily flash the XXJVS firmware on your Galaxy S, but in case if you want to watch a video of how you are going to do it, that is, flashing the XXJVS firmware is flashed using Odin, check out this video showing installation of an earlier firmware ‘XWJVB’ on Galaxy S. The procedure is same, so it would be helpful for those who are new.
- Download XXJVS firmware first. Filename: I9000XXJVS.rar. Size: 228 MB. Download Link. (password: samfirmware.com)
- Extract the downloaded file ‘I9000XXJVS.rar’ to get these 5 files:
- CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar
- GT-I9000-CSC-MULTI-OXAJVS.tar
- MODEM_I9000XXJVS_REV_00_CL1059471.tar
- s1_odin_20100512.pit
- Download Odin PC Software which we will be using to flash the XXJVS Android 2.3.5 ROM on Galaxy S. Filename: Odin3 v1.7.zip. Size: 192.55 KB. Download Link.
- Extract Odin3 v1.7.zip to get .exe file – Odin3 v1.7.exe. Run it when asked in step 7 below.
- Disconnect your phone if it’s connected to PC. Then Switch it Off. Wait 5-6 seconds for vibration to confirm complete switch off.
- Now, put the Galaxy S in “Download Mode” — press and hold these keys together: Volume_DOWN+Home+Power. This is required to Install XXJVS using Odin PC Software.
- Open Odin (from step 4) — I9003_Odin3 v1.82.exe.
- Connect your phone to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. If you don’t get “Added! !” message, than probably there is a problem with drivers. Make sure you’ve drivers installed (links given above under heading ‘Pre-Installation thoughts’).
- Now, in Odin, select these files at respective tabs (for visual help, see the screenshot at step 11 below):
- Click the PDA Tab, and select CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar (from step 2.1)
- Click the Phone Tab, and select MODEM_I9000XXJVS_REV_00_CL1059471.tar (from step 2.3)
- Click the CSC Tab, and select GT-I9000-CSC-MULTI-OXAJVS.tar (from step 2.2)
- Click the PIT Tab, and select s1_odin_20100512.pit (from step 2.4)
- Make sure these 3 checkboxes are ticked: Re-Partition, Auto Reboot and F. Reset Time. [Note: Since we’re using the .pit file, it’s important that the Re-Partition checkbox ticked, too. If sometime is future, you do not use the .pit file, then that time, keep the Re-Partition button unchecked. Just keep this in mind, always.] Leave everything else on Odin untouched.
- Double check everything said in step 9 and 10 above. Your Odin’s screen, after selecting all the files and ticking and not-ticking the checkboxes, should look like this:
- Now, hit the START button to begin the flashing process. When it finishes, your phone will automatically reboot, upon which you can unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. If it’s in red and with FAIL written over it, the process flashing process wasn’t successful.
- When it restarts, your Galaxy S will be running the Android OS, v2.3.5 with Samsung’s custom UI TouchWiz 3 atop it. Not TouchWiz v4 — that you find on Galaxy S2 — for Galaxy S right now, at least officially from Samsung. Check out you’re your phone’s android version here → Settings → About Phone.
- (Optional, of course) If you found this guide useful, share it with your friends and others on your Facebook pages, Twitter feeds and on websites you normally visits. That would be helping us grow too!
ROOT XXJVS
Yep, we just posted the root guide (with download links and all that) to root XXJVS firmware. Find the XXJVS Root here.
That’s it.
BTW, as for what’s changed apart from the Android 2.3.5 build number in “About Phone” under settings, there is not much to say. The video talk feature is missing from the GTalk app. But, the Gmail app has been updated to latest version, 2.3.5, which supports individual label-wise notification system, always show images, etc. Let us know if you find any more changes — as also how is the battery life on your Galaxy S running XXJVS.
We’d be glad to hear back from you. See you all in comments below.
938 responses to “XXJVS Firmware- Update Galaxy S i9000 to Android 2.3.5”
hi please if u can help me in this after i made software and every things is right it’s not working at all wat can i do in this
Hi , I am on Darky 10.2, which is 2.3.4. Should I wipe cash, dalvik cashe etc… Or is just the guide enough to do all.
Thanks in advance!
Guide is enough.
Hi , I am on Darky 10.2, which is 2.3.4. Should I wipe cash, dalvik cashe etc… Or is just the guide enough to do all.
Thanks in advance!
Guide is enough.
Hi , I am on Darky 10.2, which is 2.3.4. Should I wipe cash, dalvik cashe etc… Or is just the guide enough to do all.
Thanks in advance!
Guide is enough.
Incredibly detailed, and works like a charm!!! thanks a ton Kapil
Thnx 🙂
Incredibly detailed, and works like a charm!!! thanks a ton Kapil
Thnx 🙂
Incredibly detailed, and works like a charm!!! thanks a ton Kapil
Thnx 🙂
Hi Kapil, thank you for your answer!
Can I just ask 2 more things please:
1) Really irritating on my DarkyRom 10.2 is that when I open Contacts/Phone/Msgs for the first time it takes like 3 sec blackscreen at least to open them. After that they are in cash or RAM and they open instanteneously. But after some time, they are killed automatically I guess, and again when I open Contacs – 3 sec lag time, which is so irritating. Same happens with other things like manage apps or similar.
Is stock 2.3.5 having Contacts to a non kill list or something, so when you use them you don’t have to wait everytime.
2) I remember when I was on stock 2.1 even, I have Facebook sync, and when I open Contacts and tab Activities – I can see my Facebook contact, or just some Facebook activities happening. Is this working with 2.3.5?
P.S. I have a friend with 2.2.1 original stock, and she hasn’t done any customizations to her phone, and doesn’t have a lot of programs installed -> and her phone runs way much smoother than mine 2.3.4 customer rom……. ;(
Hope all will be ok when I flash custom 2.3.5 next week.
Hi Kapil, thank you for your answer!
Can I just ask 2 more things please:
1) Really irritating on my DarkyRom 10.2 is that when I open Contacts/Phone/Msgs for the first time it takes like 3 sec blackscreen at least to open them. After that they are in cash or RAM and they open instanteneously. But after some time, they are killed automatically I guess, and again when I open Contacs – 3 sec lag time, which is so irritating. Same happens with other things like manage apps or similar.
Is stock 2.3.5 having Contacts to a non kill list or something, so when you use them you don’t have to wait everytime.
2) I remember when I was on stock 2.1 even, I have Facebook sync, and when I open Contacts and tab Activities – I can see my Facebook contact, or just some Facebook activities happening. Is this working with 2.3.5?
P.S. I have a friend with 2.2.1 original stock, and she hasn’t done any customizations to her phone, and doesn’t have a lot of programs installed -> and her phone runs way much smoother than mine 2.3.4 customer rom……. ;(
Hope all will be ok when I flash custom 2.3.5 next week.
Hi Kapil, thank you for your answer!
Can I just ask 2 more things please:
1) Really irritating on my DarkyRom 10.2 is that when I open Contacts/Phone/Msgs for the first time it takes like 3 sec blackscreen at least to open them. After that they are in cash or RAM and they open instanteneously. But after some time, they are killed automatically I guess, and again when I open Contacs – 3 sec lag time, which is so irritating. Same happens with other things like manage apps or similar.
Is stock 2.3.5 having Contacts to a non kill list or something, so when you use them you don’t have to wait everytime.
2) I remember when I was on stock 2.1 even, I have Facebook sync, and when I open Contacts and tab Activities – I can see my Facebook contact, or just some Facebook activities happening. Is this working with 2.3.5?
P.S. I have a friend with 2.2.1 original stock, and she hasn’t done any customizations to her phone, and doesn’t have a lot of programs installed -> and her phone runs way much smoother than mine 2.3.4 customer rom……. ;(
Hope all will be ok when I flash custom 2.3.5 next week.
odin wasnt working with me when i started it with administrator, but when i opened it normally it worked. (if someone have same problem) 🙂
odin wasnt working with me when i started it with administrator, but when i opened it normally it worked. (if someone have same problem) 🙂
odin wasnt working with me when i started it with administrator, but when i opened it normally it worked. (if someone have same problem) 🙂
Ik heb alle stappen netjes gevolgd, alleen hij blijft naar mijn idee wel erg stil..Er staat nu al een kwartier links in het vak Message: SetupConnection..Kan iemand mij vertellen of dit hoort, of dat er iets verkeerd is.
Ik heb alle stappen netjes gevolgd, alleen hij blijft naar mijn idee wel erg stil..Er staat nu al een kwartier links in het vak Message: SetupConnection..Kan iemand mij vertellen of dit hoort, of dat er iets verkeerd is.
Ik heb alle stappen netjes gevolgd, alleen hij blijft naar mijn idee wel erg stil..Er staat nu al een kwartier links in het vak Message: SetupConnection..Kan iemand mij vertellen of dit hoort, of dat er iets verkeerd is.
i have a big problem with my i9000 i have format it and now i can’t turn it on
can i bring him to life with that one?
Install the XXJVS again by booting into download mode and follow each step correctly. Don’t worry, it will be okay.
On Oct 15, 2011 10:16 AM, “Disqus”
i have a big problem with my i9000 i have format it and now i can’t turn it on
can i bring him to life with that one?
Install the XXJVS again by booting into download mode and follow each step correctly. Don’t worry, it will be okay.
On Oct 15, 2011 10:16 AM, “Disqus”
i have a big problem with my i9000 i have format it and now i can’t turn it on
can i bring him to life with that one?
Install the XXJVS again by booting into download mode and follow each step correctly. Don’t worry, it will be okay.
On Oct 15, 2011 10:16 AM, “Disqus”
Hi Kapil,
I’m using i9000 and with Froyo and upgraded to 2.3.4 through Kies.
I have few thing to clarify
1) My current F/W is I9000XXJVQ. Kies says its the latest version. Will 2.3.5 (I9000XXJVS) compatible with my phone ?
2). If I flash my phone through Odin will I able to use Kies for future updates ?
3). Is the 2.3.5 still has the lagging problem that i have with my 2.3.4 ?
Thanks you
1. It’s compatible.
2. I think to be compatible with Kies updates, your phone should run the latest firmware available for your region. Since your region has xxjvq available as latest firmware officially, flashing back to jvq should make Kies happy. But, if you flash jvq with different csc file, there might be problem, so I can’t say it would work perfectly.
3. If you install lots of apps, the phone will slow down and will lag too. Only Galaxy S2 is the phone currently available which would not lag.
Note: I’ve found xxjvs to be the best firmware for Galaxy S1 — and I use that only on mine. Xxjvt is also out but I don’t like the blue overscroll it got almost everywhere quite wrong.
Wow! Thanks for your Quick reply!
1). Thanks
2). If someday XXJVS available with Kies will I able to continue with Kies update again ?
3). What is the best Lag fixing software you recommend for I9000 ?
sorry for lots of questions
Don’t worry to much, man. Install JVS and live a happy life. When you need Kies compatibility, flash xxjvq back. I think lagfixes and custom ROMs do not help much. JVS is wonderful and faster than any lagfix I have tried, and that includes almost every lagfix out there.
Hope it solves your probs 😀
..so true..xxjvs alone is the best than the other custom roms..thats my opinion…:)..
Thanks Kapil!
I’ll do it and give you the feedback!
Thanks again!
Dear Kapil
I flashed my phone and everything is working fine!
Thank you very much !
😀 You’re always welcome here.
Small Problem Kapil
The Swipe Keyboard is not giving right words
for example
when i type “how are you”
It comes as Hoe are tast”
for “Where is my car” as “Wekere is nu var”
Why this happens ?
Change language — swipe across space bar.
Hi Kapil,
I’m using i9000 and with Froyo and upgraded to 2.3.4 through Kies.
I have few thing to clarify
1) My current F/W is I9000XXJVQ. Kies says its the latest version. Will 2.3.5 (I9000XXJVS) compatible with my phone ?
2). If I flash my phone through Odin will I able to use Kies for future updates ?
3). Is the 2.3.5 still has the lagging problem that i have with my 2.3.4 ?
Thanks you
1. It’s compatible.
2. I think to be compatible with Kies updates, your phone should run the latest firmware available for your region. Since your region has xxjvq available as latest firmware officially, flashing back to jvq should make Kies happy. But, if you flash jvq with different csc file, there might be problem, so I can’t say it would work perfectly.
3. If you install lots of apps, the phone will slow down and will lag too. Only Galaxy S2 is the phone currently available which would not lag.
Note: I’ve found xxjvs to be the best firmware for Galaxy S1 — and I use that only on mine. Xxjvt is also out but I don’t like the blue overscroll it got almost everywhere quite wrong.
Wow! Thanks for your Quick reply!
1). Thanks
2). If someday XXJVS available with Kies will I able to continue with Kies update again ?
3). What is the best Lag fixing software you recommend for I9000 ?
sorry for lots of questions
Don’t worry to much, man. Install JVS and live a happy life. When you need Kies compatibility, flash xxjvq back. I think lagfixes and custom ROMs do not help much. JVS is wonderful and faster than any lagfix I have tried, and that includes almost every lagfix out there.
Hope it solves your probs 😀
..so true..xxjvs alone is the best than the other custom roms..thats my opinion…:)..
Thanks Kapil!
I’ll do it and give you the feedback!
Thanks again!
Dear Kapil
I flashed my phone and everything is working fine!
Thank you very much !
😀 You’re always welcome here.
Small Problem Kapil
The Swipe Keyboard is not giving right words
for example
when i type “how are you”
It comes as Hoe are tast”
for “Where is my car” as “Wekere is nu var”
Why this happens ?
Change language — swipe across space bar.
Hi Kapil,
I’m using i9000 and with Froyo and upgraded to 2.3.4 through Kies.
I have few thing to clarify
1) My current F/W is I9000XXJVQ. Kies says its the latest version. Will 2.3.5 (I9000XXJVS) compatible with my phone ?
2). If I flash my phone through Odin will I able to use Kies for future updates ?
3). Is the 2.3.5 still has the lagging problem that i have with my 2.3.4 ?
Thanks you
1. It’s compatible.
2. I think to be compatible with Kies updates, your phone should run the latest firmware available for your region. Since your region has xxjvq available as latest firmware officially, flashing back to jvq should make Kies happy. But, if you flash jvq with different csc file, there might be problem, so I can’t say it would work perfectly.
3. If you install lots of apps, the phone will slow down and will lag too. Only Galaxy S2 is the phone currently available which would not lag.
Note: I’ve found xxjvs to be the best firmware for Galaxy S1 — and I use that only on mine. Xxjvt is also out but I don’t like the blue overscroll it got almost everywhere quite wrong.
Wow! Thanks for your Quick reply!
1). Thanks
2). If someday XXJVS available with Kies will I able to continue with Kies update again ?
3). What is the best Lag fixing software you recommend for I9000 ?
sorry for lots of questions
Don’t worry to much, man. Install JVS and live a happy life. When you need Kies compatibility, flash xxjvq back. I think lagfixes and custom ROMs do not help much. JVS is wonderful and faster than any lagfix I have tried, and that includes almost every lagfix out there.
Hope it solves your probs 😀
..so true..xxjvs alone is the best than the other custom roms..thats my opinion…:)..
Thanks Kapil!
I’ll do it and give you the feedback!
Thanks again!
Dear Kapil
I flashed my phone and everything is working fine!
Thank you very much !
😀 You’re always welcome here.
Small Problem Kapil
The Swipe Keyboard is not giving right words
for example
when i type “how are you”
It comes as Hoe are tast”
for “Where is my car” as “Wekere is nu var”
Why this happens ?
Change language — swipe across space bar.
Hi can I flash from ZWJV4 to this on my i9000?
Forgive me if thats a silly question, im still trying to get my head around everything. If I wanted to flash to Miui or CM7 what would I need to do?
Hi can I flash from ZWJV4 to this on my i9000?
Hi can I flash from ZWJV4 to this on my i9000?
Forgive me if thats a silly question, im still trying to get my head around everything. If I wanted to flash to Miui or CM7 what would I need to do?
Forgive me if thats a silly question, im still trying to get my head around everything. If I wanted to flash to Miui or CM7 what would I need to do?
hi kapil, i bought this sgs gt-i9000 from dubai country im now on the philippines, how can i root my sgs 2.3.3, i9000JXJV6, kernel v 2.6.35.7-i9000JPJV6-CL233266 mobilus MEA-03 #4 that i just updated to my kies? and can i update it to XXJVS? can it harm my phone?
a reply will be a big thanx man!
Yes, you can update to xxjvs and root the xxjvs. I’ve done this many many times and it hasn’t hurt my phone.
When you’ll install, xxjvs your apps and their data will get lost.
Regards,
Kapil Malani
[nerdschalk.com]
hi kapil, i bought this sgs gt-i9000 from dubai country im now on the philippines, how can i root my sgs 2.3.3, i9000JXJV6, kernel v 2.6.35.7-i9000JPJV6-CL233266 mobilus MEA-03 #4 that i just updated to my kies? and can i update it to XXJVS? can it harm my phone? a reply will be a big thanx man!Like
Reply
hi kapil, i bought this sgs gt-i9000 from dubai country im now on the philippines, how can i root my sgs 2.3.3, i9000JXJV6, kernel v 2.6.35.7-i9000JPJV6-CL233266 mobilus MEA-03 #4 that i just updated to my kies? and can i update it to XXJVS? can it harm my phone?
a reply will be a big thanx man!
Yes, you can update to xxjvs and root the xxjvs. I’ve done this many many times and it hasn’t hurt my phone.
When you’ll install, xxjvs your apps and their data will get lost.
Regards,
Kapil Malani
[nerdschalk.com]
hi kapil, i bought this sgs gt-i9000 from dubai country im now on the philippines, how can i root my sgs 2.3.3, i9000JXJV6, kernel v 2.6.35.7-i9000JPJV6-CL233266 mobilus MEA-03 #4 that i just updated to my kies? and can i update it to XXJVS? can it harm my phone?
a reply will be a big thanx man!
Yes, you can update to xxjvs and root the xxjvs. I’ve done this many many times and it hasn’t hurt my phone.
When you’ll install, xxjvs your apps and their data will get lost.
Regards,
Kapil Malani
[nerdschalk.com]
hi kapil, i bought this sgs gt-i9000 from dubai country im now on the philippines, how can i root my sgs 2.3.3, i9000JXJV6, kernel v 2.6.35.7-i9000JPJV6-CL233266 mobilus MEA-03 #4 that i just updated to my kies? and can i update it to XXJVS? can it harm my phone? a reply will be a big thanx man!Like
Reply
hi kapil, i bought this sgs gt-i9000 from dubai country im now on the philippines, how can i root my sgs 2.3.3, i9000JXJV6, kernel v 2.6.35.7-i9000JPJV6-CL233266 mobilus MEA-03 #4 that i just updated to my kies? and can i update it to XXJVS? can it harm my phone? a reply will be a big thanx man!Like
Reply
Hi Kapil, can I update to XXJVS from ZWJV4 without harm?
Yes.
Dear Kapil
This is regarding the Swipe issue.
I checked the language settings. It was all languages selected.
I deselect all and select only UK English.
But still the problem is same…
Well, I still think the problem its with language only. Happened to me too.
Well, I still think the problem its with language only. Happened to me too.
Dear Shivam, Thanks for your reply
I found the problem.
Directly swipe language change didnt work but,
Settings > Applications > Running Services >Swipe >settings > Select Locale
Change the language here..
It fixed the problem !
Cool! Btw, I think you went to settings only, by another route. Anyway, if it ever occurs to other users and the 1st solution doesn’t work, I’ll be quick to hand out your solution to them. 😀
Dear Kapil
What is the quick route to Swipe settings ?
Is there any other way to get the chinese input working please?
Hi Kapil, can I update to XXJVS from ZWJV4 without harm?
Yes.
Hi Kapil, can I update to XXJVS from ZWJV4 without harm?
Yes.
Dear Kapil
This is regarding the Swipe issue.
I checked the language settings. It was all languages selected.
I deselect all and select only UK English.
But still the problem is same…
Well, I still think the problem its with language only. Happened to me too.
Dear Shivam, Thanks for your reply
I found the problem.
Directly swipe language change didnt work but,
Settings > Applications > Running Services >Swipe >settings > Select Locale
Change the language here..
It fixed the problem !
Cool! Btw, I think you went to settings only, by another route. Anyway, if it ever occurs to other users and the 1st solution doesn’t work, I’ll be quick to hand out your solution to them. 😀
Dear Kapil
What is the quick route to Swipe settings ?
Is there any other way to get the chinese input working please?
Dear Kapil
This is regarding the Swipe issue.
I checked the language settings. It was all languages selected.
I deselect all and select only UK English.
But still the problem is same…
Well, I still think the problem its with language only. Happened to me too.
Dear Shivam, Thanks for your reply
I found the problem.
Directly swipe language change didnt work but,
Settings > Applications > Running Services >Swipe >settings > Select Locale
Change the language here..
It fixed the problem !
Cool! Btw, I think you went to settings only, by another route. Anyway, if it ever occurs to other users and the 1st solution doesn’t work, I’ll be quick to hand out your solution to them. 😀
Dear Kapil
What is the quick route to Swipe settings ?
Is there any other way to get the chinese input working please?
I need some help. After I did the rom flashing my phone couldn’t be started. Any solution please?
Try again.
I’m you assuming you are trying it on the right phone — Samsung Galaxy S gt-i9000.
I did the wrong thing before that, now is working fine. Hehee but the only problem is the Chinese input is gone. Anyways to get it back please?
I need some help. After I did the rom flashing my phone couldn’t be started. Any solution please?
Try again.
I’m you assuming you are trying it on the right phone — Samsung Galaxy S gt-i9000.
I did the wrong thing before that, now is working fine. Hehee but the only problem is the Chinese input is gone. Anyways to get it back please?
I need some help. After I did the rom flashing my phone couldn’t be started. Any solution please?
Try again.
I’m you assuming you are trying it on the right phone — Samsung Galaxy S gt-i9000.
I did the wrong thing before that, now is working fine. Hehee but the only problem is the Chinese input is gone. Anyways to get it back please?
Hi Kapil. When will you lead us down the path toward XXJVT and beyond?
XXJVT is little bit ugly, so we didn’t share it. Is there any other new firmware?
Not that I have heard. It would be wonderful if we could move directly to ICS!!
Making an ICS firmware is Samsung’s job man. We just write a guide in how to install a firmware when it leaked on the internet.
Hi Kapil. When will you lead us down the path toward XXJVT and beyond?
XXJVT is little bit ugly, so we didn’t share it. Is there any other new firmware?
Not that I have heard. It would be wonderful if we could move directly to ICS!!
Making an ICS firmware is Samsung’s job man. We just write a guide in how to install a firmware when it leaked on the internet.
Hi Kapil. When will you lead us down the path toward XXJVT and beyond?
XXJVT is little bit ugly, so we didn’t share it. Is there any other new firmware?
Not that I have heard. It would be wonderful if we could move directly to ICS!!
Making an ICS firmware is Samsung’s job man. We just write a guide in how to install a firmware when it leaked on the internet.
is it ok to update from 2.3.3 to 2.3.5???
thanks =]
galaxy s GT i9000
is it ok to update from 2.3.3 to 2.3.5???
thanks =]
galaxy s GT i9000
is it ok to update from 2.3.3 to 2.3.5???
thanks =]
galaxy s GT i9000
and from 2.2.1 to 2.3.5. when i installed 2.2.1 i checked re-partition (512 pit). do i have again to check re-partition and do i have to turn on usb debuggini
Do as said in the guide above. Don’t do anything else. When you select 512 pit file, you have to keep re-partition checked.