[How To] Root Canadian Galaxy S5 SM-G900W8 using One Click CF Auto Root Tool

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  GUIDE: ROOT CANADIAN GALAXY S5 SM-G900W8

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-G900W8!

This guide is specifically for the Canadian Galaxy S5 with model no. SM-G900W8. Do not use the procedures discussed here on any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully root your Canadian Galaxy S5. If you are not sure, check the link below.

► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the CF Auto Root file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).

  CF AUTO ROOT FILE

DOWNLOAD LINK | File name: CF-Auto-Root-kltecan-kltevl-smg900w8.zip (21.36 MB)

  STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after rooting, which might delete internal sd card too, your files will remain safe on PC.

1. Extract/Unzip the CF-Auto-Root file, CF-Auto-Root-kltecan-kltevl-smg900w8.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:
   • CF-Auto-Root-kltecan-kltevl-smg900w8.tar.md5
   • Odin3-v3.07.exe
   • Odin3.ini
   • tmax.dll
   • zlib.dll
2. Disconnect the Galaxy S5 from PC if it is connected.
3. Double-click the Odin3-v3.07.exe file to open Odin.
4. Boot your Galaxy S5 into Download Mode:
   1. Power off your phone first and wait for 6-7 seconds after display is off.
   2. Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
   3. Press Volume Up now to continue to Download Mode
      └ For further help, check out our post on Galaxy S5 Download Mode →
      
5. Connect Galaxy S5 to PC. Odin window will show an Added!! message in bottom left box. Odin’s screen would look like this:
   
   If you don’t get the Added! message, here are some troubleshooting tips:
   • Make sure you have installed driver for Galaxy S5 as said above.
   • If you have already installed driver, then uninstall them and reinstall back.
   • Connect using a different USB port on your PC.
   • Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
   • Reboot phone and PC and then try again.
6. Load the recovery file (extracted in Step 1) into Odin as instructed below:
   • Click on the PDA button on Odin and select the CF-Auto-Root-kltecan-kltevl-smg900w8.tar.md5 file (from step 1).
     Your Odin window should look like the screenshot below:
     
7. Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
8. Double check the above two steps.
9. Click the Start button to begin flashing CF-Auto-root on your Canadian Galaxy S5, and wait until you see a PASS! message in Odin’s top left box.
10. When you get either RESET! or PASS! message, your phone will reboot into recovery and root your Galaxy S5 and again restart automatically. You can then disconnect your phone from PC.
    

If you see FAIL message instead of the RESET or PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy S5 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy S5 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

NOTE: It may happen that your phone doesn’t automatically boot into recovery and root your phone. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:

1. Pull out the battery and re-insert it.
2. Boot your Canadian Galaxy S5 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.
3. Now, this will start the rooting process and will reboot the phone automatically when the process is done.

That’s all. If you need help regarding this, feel free to ask us in comments below.

Feedback Us!

It was easy to root your Canadian Galaxy S5 SM-G900W8 using CF-Auto-Root, right? Let us know how you plan to use root privileges on your S5.

Suggestions are most welcomed!