Along with the Galaxy Note 4 OTA update (OF5) yesterday, Sprint also rolled out a similar OTA update for its Galaxy S5 variant G900P with ‘Reactivation Lock Updates’. The update carries build number G900PVPU3BOF6.

However, in case you weren’t able to install the OTA update or haven’t gotten it yet on your Sprint S5, you can now download the full Odin flashable G900PVPU3BOF6 firmware, all thanks to  Robalboa over at XDA for grabbing the .tar file of the firmware directly from Kies.

Download the G900PVPU3BOF6 firmware .tar,md5 file and Odin 3.10.6 from the links below to get started.

Download Sprint S5 OF6 full firmware (.tar.md5) Download Odin 3.10.6
How to Install Sprint S5 OF6 firmware using Odin
  1. Unzip the Odin 3.10.6 .zip file and run/open Odin3 v3.10.6.exe file from the extracted files on your PC.
  2. Boot your Sprint S5 into Download mode:
    1. Switch off your phone.
    2. Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
    3. Press Volume Up on the warning screen to accept it and boot into Download mode.
  3. Once your S5 is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the phone and show an “Added!!” message.
  4. Now click on the PA tab on Odin window and select the .tar.md5 FIRMWARE that you downloaded above.
    └ Note: DON’T play with any other options on the screen. You’re only required to connect your S5 and select the FIRMWARE file in PA tab.
  5. Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
  6. Your phone will automatically reboot when Odin is done flashing. You can then disconnect your S5.

Your Sprint Galaxy S5 should now be running on G900PVPU3BOF6 firmware build. Cheers!