Samsung has started to officially announced the Android 4.4.2 KitKat for the Galaxy Tab 3 8.0 WiFI SM-T310 tablet in the form of OTA update. It’s been almost a year that this tablet witnessed a major Android update, after the release Android 4.2.2 Jelly Bean last year, the device is now set to get the update for 4.4.2 Kitkat. So all you have to do is to check the notification for update or check it from Software update menu in the About device settings of your tablet.
However, this firmware is not globally released as of now and Samsung is slowly pushing it globally starting with France, so this process is going to take few days. But the firmware is now available at Sammobile website, so you can manually update your device to the latest KitKat update just in a few steps. So get the latest features of the Android 4.4.2 KitKat by manually updating your tablet without any further wait for the OTA to arrive.
Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components. Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device. To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-T310! Do not use the procedures discussed here on any other variants of Galaxy Tab 3 8.0 or any other device of Samsung or any other company. You have been warned! Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too. For help on Backup and Restore, check out our exclusive page on that linked right below. ► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Galaxy Tab 3 8.0. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Tab 3 8.0 on your computer. ► SAMSUNG GALAXY TAB 3 8.0 DRIVERS INSTALLATION GUIDE Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy. Odin File → download link. Firmware File → download link. Example video: If you haven’t used Odin before to install a stock firmware or anything else, then we suggest you first watch a video of that to get familiar with the process. The video demonstrates flashing of CWM Recovery on Galaxy S3, but since the procedure is same for flashing stock firmware also, the video will help: Click here to watch the video Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC. If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Tab 3 8.0 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again. Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Tab 3 8.0 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again. It was easy to flash stock KitKat Android 4.4 firmware on your Galaxy Tab 3 8.0, right? Let us know in comments below. Your suggestions and queries, if any, are most welcomed!
STOCK FIRMWARE INFO
Firmware Version
T310XXUBNE9
Android Version
Android 4.4.2, KitKat
Is this Official?
Yes! This is the official update by Samsung.
Release Date
June 2014
Credits
Sammobile
WARNING!
SAMSUNG GALAXY TAB 3 8.0 OFFICIAL KITKAT 4.4.2 FIRMWARE
STEP 0: CHECK DEVICE MODEL NO.
STEP 1: BACKUP YOUR DEVICE
STEP 2: INSTALL LATEST DRIVER
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADS
STEP-BY-STEP GUIDE
If you don’t get the Added! message, here are some troubleshooting tips:
FEEDBACK US!
worked like a charm…. excellent job!!
worked like a charm…. excellent job!!
worked like a charm…. excellent job!!